This is a service / maintenance or supply contract in New York, New York. Contact the soliciting agency for additional information.

SCOPE OF WORK: 1. The Work to be performed by the Contractor under this Contract shall consist of furnishing all labor, material, insurance, permits, equipment, filing and ancillary items necessary and appropriate for the surveying, installation, testing and repair of backflow preventers. 2. SURVEY: Survey each building as requested to determine type, location and condition of device and in some cases if a device does not exist where a device should and can be installed. The over-arching purpose of the survey is to provide NYCHA with an accurate count per building of all existing devices to include detailed pertinent information related to the device. 3. ANNUAL TEST Perform Annual Test of existing Backflow prevention device and properly complete Form GEN-215B (Attachment "A") Report on Test and Maintenance of Backflow Prevention Device Annual Test as required by the New York State Sanitary Code Part 5, Section 5- 1.31, RCNY Title 15; Chapter 20 20-04, NYS Department of Health and The D.E.P. 4. REPAIR BACKFLOW PREVENTERS Provide and install the appropriate repair kit for the device and perform retest of the device including the submission of all required reports. 5. REPLACEMENT OF BACKFLOW PREVENTERS Provide and install a new backflow preventer of the same size and manufacturer or approved equal and perform retest of the device including the submission of all required reports. 6. NEW INSTALLATION Provide and install new backflow preventer assembly including all valves, drawings, tests and filings and ancillary items required. RFQ Question Submission Deadline 3/19/24 at 2:00PM Question and Answer Release Date 3/26/24 at 2:00PM