Renovation of an educational facility in Newton, Massachusetts. Completed plans call for the renovation of a educational facility.

A. The Contractor shall provide all necessary elements including labor, equipment, materials, tools, and transportation required for all projects, on a PER CALL/AS NEEDED basis, in accordance with the standards specified herein, at all facilities under the jurisdiction of the University of Massachusetts at Amherst. B. The Contractor shall assume all costs and responsibilities for all labor, equipment, materials, tools, and vehicles required for the work under this document. The University will not provide any labor, equipment, materials, tools, or vehicles nor assist with nor accept responsibility for any of the work. C. Examples of the types of work include, but shall not be limited to: 1. Any work commonly performed by contractors certified by DCAM for General Construction. D. The work will be primarily limited to the MT IDA Campus, however, the University reserves the right to require such work at facilities in Newton, Wareham and Gloucester which are under the jurisdiction of the University of Massachusetts Amherst- MT IDA CAMPUS. E. The University reserves the right to require the Contractor to perform all work required under this document at up to three (3) sites, simultaneously. Therefore, the Contractor shall have adequate personnel and equipment readily available. F. All work shall be performed under the direction of the University Representative. G. A University issued DELIVERY / ORDER FORM, as referenced in Section 5.01-1, of this document, will be required for each project, under the direct supervision and approval of the University Representative. H. All work shall be performed expeditiously and shall comply with the schedules and time frames stated in the DELIVERY / ORDER FORM and as directed by the University. General Construction Trade Labor contract for projects under 50k UMT24-102 - Mount Ida Campus General Construction. Contractor Qualification DCAMM Certificate