Renovation of a pre-engineered storage facility in Tremont, Illinois. Completed plans call for the renovation of a pre-engineered storage facility.

As of May 28, 2024, this project has not yet been awarded. The project is expected to be awarded on May 30, 2024. Reference Number 0000346593 Tazewell County is inviting sealed bids from interested and qualified parties for the removal of old and installation of new siding and doors on a storage shed located in Tremont, Illinois. Question Deadline 04/03/2024 at 5:00 PM CT Questions are submitted online No. Questions regarding this Invitation to Bid must be submitted in writing to Mindy L. Darcy, Tazewell County Finance Director / Assistant County Administrator at bids@tazewell-il.gov . Remove all existing metal siding, overhead doors, access doors, insulation and replace with new. The building is a 44x80x16 metal storage shed. Site Location The building is located behind Tazewell County's Emergency Management Agency (EMA) building, located at 21304 Illinois Route 9, Tremont, Illinois 61568 Scope of Work - Tazewell County is seeking cost proposals for furnishing all necessary supervision, labor, tools, equipment, and materials to remove existing metal siding, overhead doors, access doors, insulation and replace with new. The contractor shall provide an all steel 29 gauge McElroy, or similar, steel siding. 40-Year, Kynar Max-Rib Ultra, or similar, steel, 80,000 psi tensile strength. The contractor shall remove existing 3'x80" doors and replace with two (2) 3'"x80" Plyco, S92, or similar product, steel insulated walkthrough doors with lockset and deadbolt. Remove existing 16'x14'overhead doors and replace with three (3) 16'x14' R-18 insulated doors with operators in the sidewall. Repairs shall include the removal and replacement of any deteriorated header at door frames and or siding supports. The building improvements and repairs shall include the addition of 6" gutters and downspouts at each side of building. The contractor shall be required to secure all materials, clean all work areas and remove all trash, debris, etc. from premises at the end of daily production in order to safeguard materials and surrounding buildings. There will be a pre-bid meeting during which all work areas will be visited and will allow contractors to verify measurements and address any questions.