Site work and paving for a road / highway in Atwater, California. Completed plans call for site work for a road / highway; and for paving for a road / highway.

**As of June 4, 2024, the project was awarded to Consolidated Engineering Inc. , in an amount not to exceed $201,246 .** Scope of Work: The Work generally consists of: 1) a 1.5-inch pavement overlay located on Suncrest Street between Briarwood Street and Liberty Street, including conform overlay paving to the end of curb returns on each intersecting street; 2) a 1.5-inch pavement overlay located on Fortuna Avenue between Palm Avenue and First Street; and 3) an additive alternate for a 1.5-inch pavement overlay located on Suncrest Street between Canal Drive and Briarwood Street. The Base Bid Work includes approximately 50,660 square feet of existing surfaced roadway and the Additive Alternate Work includes approximately 18,970 square feet of existing surfaced roadway. All roads included in the project are to be paved "current" to Caltrans Standard Specifications. The Work is described in more detail in the following paragraphs and shall be performed by the Contractor pursuant to current Caltrans standard specifications. All materials and construction methods shall conform to Caltrans Standard Specifications and all applicable material and performance standards therein referenced for hot mix asphalt and other bid items for the intended use and application. Material delivery shall conform to the recommended delivery standards and quality control regarding temperature of materials. The Contractor shall furnish all labor, materials, equipment, tools, incidentals, permits, services, and construction required to complete the Work, which includes: o mobilizing all required resources to complete the Work; o providing temporary traffic control; o providing erosion, sedimentation, and pollution control; o removing existing pavement by wedge grind; o removing existing pavement markers; o removing existing traffic striping and pavement markings by grinding; o disposing and/or recycling of all removed and excess materials; o handling and disposing of any and all hazardous materials; o repairing and filling existing pavement cracks, potholes, and boils; o leveling low/depressed areas of existing pavement; o raising existing utility covers to finish grade; o upgrading existing curb ramps with detectable warning surface (truncated domes); o cleaning loose sand, dirt, debris, and other contaminants from existing pavement; o applying asphalt binder tack coat and sealant; o installing geosynthetic pavement fabric; o placing and compacting 1.5" Type A HMA pavement overlay with 1/2" max. aggregate size; and o replacing thermoplastic traffic striping and pavement markings, and pavement markers. The newly placed asphalt overlay shall tie in smoothly with the existing road surface and shall be applied to improve or correct any existing drainage issues. Contractor shall maintain the integrity of existing curbs, gutters, drainage inlets, culverts, or any drainage apparatus. Apply the "STOP" word marking and a stop bar line at all existing Stop signs, including where none currently exists. No bid will be received unless it is made on a bid form furnished by the CITY OF ATWATER PUBLIC WORKS DEPARTMENT. Copies or facsimiles of the bidder's completed and executed bid forms submitted as a bid will be rejected. Each bid must be accompanied by a certified check, cashier's check, or bidder's bond made payable to the CITY OF ATWATER for an amount equal to at least ten percent (10%) of the amount of bid, such guaranty to be forfeited should the bidder to whom the contract is awarded fail to enter into the contract. The Contractor must have a valid California license of Classification A - General Engineering Contractor, or C-12 - Earthwork and Paving, to perform this work. The successful bidder will be required to obtain a City of Atwater Business License at his/her own expense before execution of the contract. Bids must be on a unit price basis. All bids are to be compared on the basis of the CITY OF ATWATER'S estimated quantities of work to be done. If awarded the Contract, you propose to employ the following subcontractors to perform work or labor or render service in or about the work in an amount in excess of one-half of one percent (0.5%) of the total amount of your proposal or $10,000, whichever is greater. Listing of subcontractors is mandatory under Sections 4100-4108 of the Public Contract Code. If no subcontract work is proposed, except within the one-half of one percent (0.5%) or $10,000 limit set forth, you will so state in accordance with the bid, and files two bonds with the City of Atwater one to guarantee faithful performance and the other to guarantee payment for labor and materials, as required by law, then this obligation shall be null and void; otherwise, it shall be and remain in full force and effect or the payment of amounts due under the Unemployment Insurance Codewith respect to such work or labor in connection with this Contract, and for the payment of areasonable attorney s fee to be fixed by the court in case suit is brought upon the bond (Labor and Material Bond ). The estimated cost of construction is $189,000. Complete work within 30 working days. Examine all of the various parts of these Documents if contemplating the submission of a bid, and shouldthere be any doubt as to the meaning or intent of the Contract Documents, you must request aninterpretation, in writing, by Thursday, April 04, 2024, at 5:00 p.m. Any interpretation or change in theContract Documents will be made, in the form of addenda to the Documents and will be furnished to allBidders receiving a set of the Documents. Addenda will be issued by Monday, April 08, 2024 at 2:00pm. The City is not responsible for any other explanation or interpretations of the Document Aid Contract without a DVBE Goal The Contractor must have a valid California license of Classification A General Engineering Contractor, or C 12 Earthwork and Paving, to perform this work.