Site work and paving for a road / highway in Millers Creek, North Carolina. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The work covered by this provision consists of clipping high shoulders and reconstructing the earth shoulder in accordance with Standard Drawing No. 560.01 and 560.02 of the Roadway Standard Drawings with the following exceptions: the width will be shown on typical sections, or to the existing shoulder point, whichever is nearer, as long as the desired typical is achieved. Seeding and mulching shall be performed upon completion of shoulder grading when earth borrow is used. This work shall be performed immediately after the resurfacing operations are complete as directed by the Engineer. Contract Id DK00379 WBS: 2024CPT.11.07.10971 County: Wilkes Location: 1 Section of Primary Route in Wilkes County Job Type: Resurfacing, Patching, and Pavement Markings Contractors must be pre-qualified with NCDOT as Bidder or PO Prime Contractor prior to bidding on this project. The date of availability for this project is June 1, 2024. The date of completion for this project is December 1, 2025. A Bid Bond or Bid Deposit in the Amount of 5% of the Total Amount Bid Will Be Required. the Bidder Shall Submit an Electronic Bid Bond With Each Electronic Bid Submittal Unless He Elects to Furnish a Bid If you have questions about bidding on this project or any other question concerning this project, please contact me at (336) 903-9115 or belmore@ncdot.gov. NCDOT - Resurfacing, Patching and Pavement Markings