Renovation of a municipal facility in Spring Valley, California. Completed plans call for the renovation of a municipal facility.

All questions concerning the Pre-Proposal Conference, bid specification or scope of work must be submitted in writing either by mail, facsimile, or e-mail, and received April 15, 2024 through April 19, 2024, and no later than 2:00 P.M. at the address below: Sweetwater Authority Attn: Purchasing Division 744 F Street Chula Vista, CA, 91910 Fax # (619) 427-9574 purchasing@sweetwater.org Sweetwater Authority (Authority) is a public water agency that provides water service to approximately 186,907 people in National City, Bonita and the western and central portions of Chula Vista, California. All provisions of law applicable to public contracts will be made part of the final contract to the same extent as though set forth herein and will be complied with by the successful Bidder. THE DESIRED SERVICE This Request for Quote (RFQ) is issued to cover the cost to Sweetwater Authority (Authority) for miscellaneous exterior painting to be completed at the Authority's Perdue Water Treatment Facility. Location: Sweetwater Authority Perdue Water Treatment Facility 100 Lakeview Avenue Spring Valley, CA 91977 SCOPE OF WORK OPTION 1 The vendor shall provide all labor, supervision, materials, tools, equipment, and incidentals. This work entails: Exterior Painting 1. Pressure wash property to remove loose paint, mildew, and debris from all paintable surfaces. 2. Prepare scrape, sand, and treat with corrosion control all areas as required. 3. Prep and paint 22 metal single doors, frames, and trim. 4. Prep and paint 5 metal double doors, frames, and trim 5. Prep and paint 4 roll-up doors, frames, and trim. 6. Prep and paint Filter Gallery area, steel beams, piping and supports. See Attachment A 7. Prep and paint all handrails and metal railings. 8. Prep and paint 53 bollards and 5 bumper guards. 9. Prep and paint all downspouts. Additional Notes: o The contractor shall calculate and verify paint coverage area. o The contractor shall submit samples to the Authority and verify colors, prior to ordering materials. o Protect all area not being painted from overspray, this includes, but is not limited to, vegetation, landscaping, glass, sidewalks, pavement, vehicles and any areas subject to wind-blown or dripping/falling paint. SURFACE PREPARATION STANDARDS (as applicable) o SSPC-SP2 Hand Tool Cleaning o SSPC-SP3 Power Tool Cleaning o SSPC-SP12 / NACE 5 Surface preparation and cleaning of steel and other hard materials - pressure categorization (LPWC) with visual conditions of surface cleanliness at WJ-4. PAINT SYSTEMS Ferrous Metal: o Primer - First Coat - "Ulta-Grip Premium" (UGPR00) or equal o Finish - Second and Third Coat -"Evershield" (EVSH50) or equal. Non-Ferrous Metal (galvanized & aluminum) o Primer - First Coat - "Ulta-Shield Metal Primer" (ULGM00) or equal o Finish - Second and Third Coat - "Evershield" (EVSH30) or equal. Additional pre bid meeting note: Tours of the facilities WILL NOT be provided before or after the pre-proposal conference. The job site tour and inspection are considered to be mandatory, a company representative must be present in order to submit a quote. Please email Val Martinez at vmartinez@sweetwater.org or (619) 409-6867 if you plan to attend the pre-proposal meeting.