Renovation of a warehouse / distribution facility in Port Isabel, Texas. Completed plans call for the renovation of a warehouse / distribution facility.

The LMWD will not be responsible in the event that the U.S. Postal Service or any other courier system fails to deliver the sealed bids to the Laguna Madre Water District, General Manager Office by the given deadline above. No bids will be accepted via facsimile or electronic submission. The LMWD specifically reserves the right to reject any or all bids, to waive irregularities or informalities in any or all bids and to accept any bid which is deemed to be in the best interest of the LMWD. For any clarifications, please contact Enrique Samaniego at Laguna Madre Water District, Purchasing Agent at (956) 943-2626 Ext.312 or e-mail: esamaniego@lmwd.org Questions concerning terms, conditions, and technical specifications should be directed to: Enrique Samaniego Purchasing Agent (956) 943-2626 Ext 312 Email: esamaniego@lmwd.org REQUIRED QUALIFICATIONS The District is seeking a qualified, dependable, and competent roofing contractor for reroofing warehouse buildings at the Laguna Madre Water District warehouse located at 131 Woodys Ln, Port Isabel, TX 78578. This Contractor must have trained inspectors, technical expertise and experience working with government contracting agencies specifically with regards to project management control. SCOPE OF WORK The successful bidder shall provide labor, equipment, supplies, materials, tools and all associated work and services necessary or incidental for the reroofing warehouse buildings. 1. The successful bidder shall familiarize themselves with the site conditions prior to the bid. 2. The successful bidder shall follow all state, and local regulations/ requirements necessary to perform the task at hand. 3. No down payment or upfront monies will be given towards the contract. 4. Metal roof building # 1 approx. 160'x80', Metal roof building # 2 approx. 90'x100' 5. Ensure roof is clean, dry and tight 6. Treat rusty areas 7. Perform a minimum of 2 adhesion test or a minimum of 1 adhesion test per every 100 squares. 8. Power wash roof with cleaner and allow to dry 9. Apply primer 10. Apply coating 11. Finish off with sealer 12. Treat around vents and penetrations