Site work and paving for a mixed-use development in Port Isabel, Texas. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

The LMWD will not be responsible in the event that the U.S. Postal Service or any other courier system fails to deliver the sealed bids to the Laguna Madre Water District, General Manager Office by the given deadline above. No bids will be accepted via facsimile or electronic submission. The LMWD specifically reserves the right to reject any or all bids, to waive irregularities or informalities in any or all bids and to accept any bid which is deemed to be in the best interest of the LMWD. For any clarifications, please contact Enrique Samaniego at Laguna Madre Water District, Purchasing Agent at (956) 943-2626 Ext.312 or e-mail: esamaniego@lmwd.org Questions concerning terms, conditions, and technical specifications should be directed to: Enrique Samaniego Purchasing Agent (956) 943-2626 Ext 312 Email: esamaniego@lmwd.org REQUIRED QUALIFICATIONS The District is seeking a qualified, dependable, and competent asphalt paving and repairs contractor for parking lot reconstruction at the Laguna Madre Water District truck barn located at 105 Port Rd, Port Isabel, TX 78578. This Contractor must have trained inspectors, technical expertise and experience working with government contracting agencies specifically with regards to project management control. SCOPE OF WORK The successful bidder shall provide labor, equipment, supplies, materials, tools and all associated work and services necessary or incidental for the parking lot reconstruction. 1. The successful bidder shall familiarize themselves with the site conditions prior to the bid. 2. The successful bidder shall follow all state, and local regulations/ requirements necessary to perform the task at hand. 3. No down payment or upfront monies will be given towards the contract. 4. 8" Reinforce Concrete (4000 psi), approx. 8662 SY 5. 6" Compacted Limestone Base (TxDOT 247, Ty"A"), approx. 8662 SY 6. 6" Subgrade Treated with 7% Slurry Lime (by Weight), approx. 8662 SY 7. Tensar Triax TX140 Geogrid, approx. 8662 SY 8. 6" Concrete Driveway (4000 psi), approx. 211 SY 9. Site Preparation Detailed Specs The contractor shall be responsible for the removal and disposal of existing pavement, base and construction material. Paving shall not be placed during rainy or inclement weather or when the moisture on the surface would prevent satisfactory bonding. The contractor will roll with consecutive passes to achieve even smooth finishes without roller marks. The finished surface shall be flush with existing adjacent grass lawn areas. Areas that fail to conform to this standard shall be repaired at no additional cost to the District. The contractor shall clean the job area at the end of the project and dispose of all trash and debris.