Site work for a water / sewer project in Lansdale, Pennsylvania. Completed plans call for site work for a water / sewer project.

The work under this contract consists of demolition and disposal of 5 (five) positive displacement (PD) blowers including air piping and valves and installation of 10 (ten) new PD blowers with Variable Frequency Drives (VFD) and associated air piping and valves, including electrical work. Except for blower and starter panel demolition, no changes to the existing blowers building are currently proposed. The new blowers will be placed on 5 (five) concrete pedestals located at the following locations within the existing wastewater treatment process: Equalization (EQ) Tank (T-30) - 2 blowers. Offline EQ Tanks (T-31, 32, 33) - 3 blowers. Grit Building - 2 blowers. Activated Sludge Tanks (T-3 & T-4) - 2 blowers. Denitrification Tanks (T-11 & T-12) - 2 blowers. The present work includes installation of motorized butterfly valves, DO and ORP probes within the existing treatment basins. The work under this contract excludes air diffuser replacement, process control, and PLC/SCADA programming. The process control and the programming portion of the work will be performed under a different contract that will require active coordination with the SCADA integration during the project. The Borough uses Keystone Engineering Group (Keystone), located in Malvern, PA, as their SCADA and electrical engineering consultant. The Contractor shall coordinate all SCADA integration efforts with Keystone. To facilitate this coordination, mandatory meetings will be scheduled during the length of the project recurring every 2 weeks. All questions during the bidding period must be submitted through PennBid. Question Deadline 06/07/2024 at 5:00 AM ET SCOPE OF WORK A. Furnish all labor, equipment and materials required to complete the system start-up and to train the Owner's personnel in the maintenance and operation of the facility system as related to the well pumping equipment, controls, electrical components and associated facilities, as herein specified. B. The goal of the training is to provide the Owner's personnel with sufficient information on the theory, operation, maintenance, repair and troubleshooting of the equipment and systems such that the installation can be efficiently operated and maintained by said personnel upon the completion of the training. In addition to training, the goal is to successfully test and place into service the new facilities constructed as part of this Contract