Site work for a pipeline in Dalton, Georgia. Completed plans call for site work for a pipeline.

Level 1A Pipe Lining Project. This Project Will Employ a Numerically Scored Proposal Procurement Process to Encourage Creative, Problem-solving Approach Efforts of an Experienced, Highly Motivated Pipe Lining Contractor. Public Works may be contacted at (706) 278-7077 or by mail at P.O. Box 1205, Dalton, Georgia 30722. Questions shall be addressed to Jorge Campos, by phone at 706-278-7077 or by email at jcampos@daltonga.gov. 04/20 05/03 The City, through its Public Works Department, wishes to restore deteriorated segments of existing stormwater culverts of varying sizes at various locations throughout the City. The City is requesting proposals from reputable contractors to restore in-situ, culverts specified within the proposal packet. Qualified contractors are to provide detailed restoration methods for each pipe diameter listed in the proposal form. Restoration methods are requested to provide as close to the comparable hydraulic conditions as possible of each culvert size/type, incorporate structural repairs if determined necessary, and extend the serviceable lifespan comparable to that of newly-constructed concrete culvert systems. Contractor shall be required to account for structural needs to provide sufficient strength for vehicular loadings for culverts spanning underneath roads, depth of cover constraints as provided in enclosed exhibits, and any additional factors determined appropriate by the Contractor. The City is relying on the proven experience of Contractors to determine additional parameters required, and provide as much explanation pertaining to the proposed approach as possible for consideration of the proposal. The total length of pipe lining is approximately 3,100 LF of corrugated metal & reinforced concrete pipes of varying dimensions. See Exhibit A and Exhibit B for more detailed information. Scope: 1. Bypass Pumping of Work Area – (If Determined to be Needed by Contractor) 2. Clean / Prep Existing Pipe as Needed 3. Re-establish Pipe Invert as Needed – Include Detailed Invert Restoration Plan (If Determined to be Needed by Contractor) 4. Install Full Circumference In-Situ Pipe Lining 5. Post Construction CCTV Inspection Before submitting, the Contractor shall be responsible for reviewing the RFP and Specifications and visiting the work locations. Each Contractor shall fully inform themselves as to all existing conditions and limitations under which the work is to be performed and shall include in the proposal a total sum to cover all costs of materials and labor to perform the work as set forth in the RFP and Specifications. The Contractor, in undertaking the work under this contract, shall have visited all locations, and have taken into consideration all conditions that might affect his work. No consideration will be given to any claim based on a lack of knowledge of existing conditions, except where the Contract Documents make definite provisions for adjustment of cost or extension of time due to existing conditions that cannot be readily ascertained (unforeseen conditions). CITY WILL OBTAIN ALL REQUIRED EASEMENTS FOR COMPLETING THE REQUESTED SCOPE OF WORK ADVERTISED WITHIN PROPOSAL PACKET. The Contractor’s proposal shall include the proposed manufacturer’s warranty along with any information/pricing on available extended warranties. Include a detailed description of the Owner’s responsibilities or obligations throughout the warranty period. The proposal shall include the history of warranty issues and or recalls and how these have been addressed. Applications can be obtained from the Finance Department or online at https://www.daltonga.gov/finance/page/vendor-packets