Renovation of a mixed-use development in Calabasas, California. Completed plans call for the renovation of a educational facility.

Building ID Letter Installation - All Sites. Contractor's License Classification Required: B Question Deadline 04/26/2024 The Contract Time is 68 days from the date of the Notice to Proceed. AC Stelle Middle School 22450 Mulholland Hwy Calabasas 91302 AE Wright Middle School 4029 Las Virgenes Rd Calabasas 91302 Agoura High School 28545 W. Driver Avenue Agoura Hills 91301 Bay Laurel Elementary 24740 Paseo Primario Calabasas 91302 Calabasas High School 22855 W. Mulholland Hwy Calabasas 91302 Chaparral Elementary 22601 Liberty Bell Rd Calabasas 91302 Lindero Canyon Middle School 5844 Larboard Lane Agoura Hills 91301 Lupin Hill Elementary 26210 Adamor Rd Calabasas 91302 Mariposa School 6050 N. Calmfield Ave Agoura Hills 91301 Round Meadow Elementary 5151 Round Meadow Rd Hidden Hills 91302 Sumac Elementary 6050 N. Calmfield Ave Agoura Hills 91301 White Oak Elementary 31761 W. Village School Rd Westlake Village 91361 Willow Elementary 29026 Laro Dr Agoura Hills 91301 Yerba Buena Elementary 6098 Reyes Adobe Rd Agoura Hills 91301 Scope of Work: Installation of Building Lettering Introduction: The purpose of this document is to outline the scope of work for installing lettering on the side of school buildings to clearly identify each building. Project Overview: The project involves installing lettering on the exterior facades of all school campus buildings to indicate the name or identification of each building within the premises. The lettering will be provided by the District. Locations: AC Stelle Middle School, AE Wright Middle School, Agoura High School, Bay Laurel Elementary School, Calabasas High School, Chaparral Elementary School, Lindero Canyon Middle School, Lupin Hill Elementary School, Mariposa School, Round Meadow Elementary School, Sumac Elementary School, White Oak Elementary School, Willow Elementary School, and Yerba Buena Elementary School Scope of Work: 3.1 Site Survey: - Conduct a thorough survey of the buildings to determine the optimal location. - Consider factors such as visibility, architectural aesthetics, and structural integrity. 3.2 Installation: - Prepare the exterior surfaces of the buildings for installation, ensuring they are clean and free from debris. - Install the lettering securely using appropriate mounting hardware and techniques. - Drill holes in the walls (stucco, T-11 siding, wood beams, metal) and use a Scotch-Weld Epoxy in the holes and use PL Premium Polyurethane Construction Adhesive on the back of the letters for extra holding. - Ensure proper alignment and spacing of the lettering for aesthetic appeal and readability. - Provide lifts for access - Adhere to safety protocols and regulations throughout the installation process. 3.3 Quality Assurance: - Conduct thorough inspections of the installed lettering to ensure it meets the specified quality standards. - Rectify any defects or issues promptly. 3.4 Districts Acceptance: - Coordinate with the District to inspect the completed installation. o - Obtain Districts acceptance and sign-off upon satisfactory completion of the project. o Deliverables: o Installed lettering on the exterior facades of buildings. o Inspection reports. o Districts acceptance documentation