Site work and paving for a road / highway in Gresham, Oregon. Completed plans call for site work for a road / highway; and for paving for a road / highway.

2024 Street Surfacing, Slurry Seal The Engineer's Estimate for this project is $500,000 to $600,000. The character of the work is street maintenance surface seal. The major quantities of work involved in this project are: QUANTITY, MEASUREMENT, ITEM 180,283 SY, TYPE II SLURRY SEAL The Project Manager for this project is Amber Messenger, Engineering Technician Senior, Department of Environmental Services 503.618.2963, Amber.Messenger@GreshamOregon.gov. The project completion date is August 30th, 2024. The apparent low bidder will be required to have the current edition of the City of Gresham Public Works Standards. This project is for public work and is subject to ORS 279C.800 to 279C.870, the Oregon Prevailing Wage Law. All bids must be submitted on the forms furnished by the City of Gresham, mailed or delivered in a sealed envelope plainly marked "SEALED BID for 2024 Street Surfacing, Slurry Seal" and bearing the name and address of the bidder. The bid must be accompanied by a certified check, cashier's check or bid bond in an amount not less than ten percent (10%) of the total bid. The City of Gresham requires all Contractors to comply with equal opportunity policies . The City's programs, services, employment opportunities, volunteer positions and contracts are open to all persons without regard to race, religion, color, national origin, sex, age, marital status, disability, or political affiliation *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. DESCRIPTION This section covers the work necessary for furnishing all labor, equipment, and materials necessary for the preparation and application of slurry seal consisting of latex modified emulsified asphalt, mineral aggregate, water, and additives mixed and uniformly spread over a properly prepared surface as shown or directed. The slurry seal shall be applied as a homogeneous mat, adhere firmly to the prepared surface, and have a skid-resistant texture throughout its service life.