Residential building construction services including general residential construction contractor services and new residential construction and remodel services SCOPE OF WORK:
Work items include:
o o Contractor is responsible to compare Scope of work to the house and drawings and submit questions before bid opening.
o Obtain building permit and engineering stamp for seismic retrofit.
o Remove lower portion of the roof covering and decking from the roof to gain access to top of brick walls for the seismic roof to wall connection.
o Install pins, bolts, framing anchors, blocking and straps as per engineering plans and details for the building permit.
o Bracing of chimney(s), if applicable, per engineering plans and details for the building permit (1)
o After final inspection is completed, install roof decking where removed.
o Install new roof covering to match existing, as close as possible, along the perimeter of the home where removed for seismic retrofit.
o Clean up and removal of all construction debris.
o The Unreinforced Masonry/Wood gable walls will require additional seismic improvements not listed in the Scope of Work. (3)
o The seismic improvement may include gable bracing attached to the Masonry/Wood gable.
o If shear walls are needed to connect walls to roof, that is part of the roof to wall connection process.
o At permitting, a stamped engineered drawing shall detail the seismic improvement procedure.
o Please do not include any work pertaining to solar panels, the solar company will remove and reinstall. All bids submitted by a General Contractor must contain a detailed Scope of Work. Any changes to the Scope of Work Description will be issued through an addendum. If issued, the addendum must be acknowledged in the submitted bid to be considered responsive. Any and all work outside of seismic should be at contractors' discretion whether or not they submit a bid Pre-Bids have been set at the time and place set forth in this notice. Please adhere to the following Pre-Bid procedures:
o Out of respect for the homeowner, no contractor shall contact the homeowner independent of the Pre-Bid once the address has been released
o Housing Stability Staff will initiate contact with the homeowner on the date and time of the Pre-Bid
o Contractors must not set foot on the property until Housing Stability Staff are present
o Homeowner and contractors must sign the Pre-Bid Attendance Register as proof of attendance prior to taking measurements of the property This Project Will Be a Federally Financed Community Development Project. All Rules and Regulations Governing Such Projects Will Be Applicable. The Contract is to Be Awarded to the Lowest Responsible and Responsive Bidder, Whose Bid Meets the Requirements and Criteria Set Forth in the Request for Bids. All contractors participating in this project must have a Unique Entity ID (UEI) number and be registered on the federal System for Award Management (SAM) at online. For further information, contact SHYANN HUGOE at (385) 977-7962. All bids submitted by a General Contractor must contain a detailed Scope of Work. Any changes to the Scope of Work will be issued through an addendum. If issued, the addendum must be acknowledged in the submitted bid to be considered responsive. Any and all work outside of seismic should be at contractors' discretion whether or not they submit a bid.
.webp)
