Site work and paving for a road / highway in Omro, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

2024 Chip Sealing Requires 5% Bid Bond. The City of Omro Reserves the Right to Reject Any and All Bids and to Waive Any Informality in the Bidding Process. Project Scheduling Work may begin after contracts are executed. All work shall be completed on or before September 30, 2024 Scope of Work: This work shall consist of furnishing all materials, equipment, and labor necessary for the application of Bituminous Seal Coating as directed. Description: The work shall consist of bituminous seal coating with stone cover aggregate. The work shall be done in accordance with Section 475, State of Wisconsin Department of Transportation "2020 Standard Specifications for Highway and Structure Construction" with the special provisions for aggregate below. Materials: Materials furnished and used in the work shall conform to the requirements of Section 475. Aggregate must be a washed crushed granite quarry stone classified as a Class A aggregate and grey in color. Limestone, pea stone and boiler slag are not permitted. A. Asphaltic Material Seal Coat. Apply the asphaltic material at the following: Rate of application: 0.30 +/- .03 gallons/SY Supplement 455.2.4.3 (1) of the standard specifications with the following: Furnish material conforming, before dilution, to the following: Polymer-modified cationic emulsified asphalts............AASHTO M 316 B. Cover Aggregate: The cover aggregate shall meet the requirements of The sieve specifications, and conform to the following sieve size. Sieve Size Percent Passing 1/2 inch 100 % 3/8 inch 100 % 1/4 inch 100 % No. 4 0- 100 % No. 8 0 - 45 % No. 16 0 - 15 % No. 50 0 - 7 % No. 100 0 - 4 % No. 200 0 - 2 % The aggregate shall be applied at the rate of 20 +/- 3 pounds per square yard. The Contractor shall take all precautions to minimize contamination of the aggregate.