Renovation of an educational facility in New York, New York. Completed plans call for the renovation of a educational facility.

Description: Swimming Pool/Low Voltage Electrical Systems Performance Period: 600 Continuous Calendar Days (See Page CC-3 and Appendix B) Liquidated Damages: Two Thousand ($2,000) Dollars per Continuous Calendar Day and as set forth in the Construction Contract Page CC-3 and Appendix B A Bid Bond along with its Power Attorney prepared on the form attached to the Construction Contract as Appendix C or a Certified Check of the Bidder for five (5%) percent of the Bid Amount must accompany the Lump Sum Bid Form (Appendix A A "Wicks" subcontractor is defined as a subcontractor performing construction work in the HVAC, Plumbing & Gas Fitting or Electrical Trades and (except for HVAC) licensed to do business in the CITY OF NEW YORK in that trade. All questions by prospective bidders concerning this solicitation should be directed to rfisca@nycsca.org, in writing at least three (3) business days prior to the originally scheduled, or, if applicable, postponed bid opening date using the project solicitation number in the subject line as indicated in the following example: RFISCA 24-12345D-1 Smith and Jones Construction. Please send all Questions to rfisca@nycsca.org, however, if you have any additional questions or issues please contact Donna Hendricks at E-mail: dhendricks@nycsca.org or at Phone Number: (718)472-8823. DESCRIPTION OF WORK A. This section applies to all work conducted in existing premises. This includes work that may generate dust and debris, work that disturbs painted surfaces assumed or known to be lead-based paint and/or that disturbs ballasts, light bulbs, batteries, Mercury Containing Equipment, electronics or other hazardous materials not specifically covered in other specifications. B. Furnish all labor, materials, equipment, and incidentals required to remove, handle, store, and dispose of all PCB containing and non-PCB containing ballasts, light fixtures, fluorescent bulbs as specified, as shown on the Drawings and Specifications and as directed by the Authority. Work shall be done in accordance with all applicable City, State and Federal laws and regulations and SCA protocols. C. Abate and dispose of all asbestos containing material (ACM) as specified in section 02081, as shown on the Drawings, and as directed by the Authority. Work shall be done in accordance with all applicable City, State and Federal laws and regulations and SCA protocols. D. Architectural and electronics wastes that would otherwise be hazardous waste due to metals (e.g., scrap metal with lead-based paint, computers) may only be recycled if the contractor meets the New York State Department of Environmental Conservation (NYSDEC) hazardous waste recycling regulations (e.g., 6 NYCRR 371.1(c)(7)) notification). The Contractor shall provide all labor, equipment and materials for performance of the Work in accordance with the Contract Documents. E. Unless the Authority provides information regarding the lead content of specific painted surfaces, all interior painted surfaces are assumed to contain lead based paint. Manage all waste and wastewater as described in Articles 1.28 and 1.29, including determining if it is Toxicity Characteristic (e.g., lead containing) hazardous waste. P.NO. Q00971472-Il