Mast Arm Pole. Question Deadline 06/10/2024 at 11:00 AM ET All questions must be submitted to the Procurement Officer no later than Any information regarding the requirements or the interpretation of any provision of the Contract Documents shall be requested, in writing, and delivered no later than this date and time. Responses to questions or inquiries on the bids shall be made by written addenda sent to all prospective bidders at online. Request for information or questions shall be submitted in writing. They must be emailed tonacharya@mdot.maryland. Surface Preparation. Prepare the galvanized surface by solvent cleaning conforming to SSPC SP-1, followed by brush off blast cleaning conforming to SSPC SP-7 using grit. The blast profile shall be 2 to 3 mills as determined in conformance with D 4417, method C. When blast cleaning exposes bare steel, spot prime the bare steel with an Organic Zinc Rich Coating in conformance with A 780. Apply the polyester powder within 24 hours of surface preparation. MATERIALS. Materials shall conform to one of the systems described below. All coatings in the system shall come from the same manufacturer. The Manufacturer shall be on the "Approved List of Manufacturers" maintained by the Office of Materials and Technology, Metals, Coatings and Structural Materials Team. DESCRIPTION. Coat new galvanized steel structures, including exposed anchor bolts, flange bolts, nuts, and washers, as specified in the contract documents or as directed by the Engineer. Color will be as specified in the contract documents. Prices submitted in response to this solicitation are irrevocable for ninety (90) days following the due date. The Procurement Officer may, however, request vendors to extend the time during which the State may accept their bids. Once a bid is accepted, all prices, terms, and conditions shall remain unchanged throughout the contract period.
.webp)
