Renovation of a military facility in Eglin, Florida. Completed plans call for the renovation of a military facility.

The purchase and installation of a standalone Lene badging system. The 53rd Wing requires the Lenel Access Control System (ACS) be transitioned from a centralized networked system located in building 351, room 503 to a de-centralized/segregated ACS with standalone terminals for each of the 53 WG SAPFs located on Eglin AFB, Florida (6 total). These shall act as primary systems, on site and shall have their own Lenel software administration for the access control points within their facility. The contractor install a new government purchased workstation/server and paper printers at each location. The system currently located within building 351, room 500 shall not only be as the administrative control of the ACS for rooms 500 and 503 S/T but shall also act as the only badge creation workstation for the entire Wing. Once created, these badges shall then be enrolled in each of the other 53rd Lenel systems as needed based on access requirements. All existing facility Lenel hardware (controller locations) shall be reused. Should the IP structure of the current system be required to change, access to each Lenel controller shall be required for re-programming. The contractor shall provide a total of ten (10) hours of training for instruction of the new 53 WG admin teams (2 hours for each system) in the use of the Lenel software. the existing 53 Wing/AP database shall be copied and migrated into each of the new Lenel workstation/servers. Questions shall be emailed to both the Contract Specialist, Mar'Sha K. Andrus: marsha.andrusus.af.mil and Contracting Officer, Francisco A. Arredondo: francisco.arredondous.af.mil by Tuesday, 09 JUN 2024 at 4:00pm Scope. 1.3.1. Make a copy of the existing 53rd WG/AP Lenel database and migrate it into each of the new workstation/servers within buildings 60, 64, 985, and bldg. 351 rooms 401, 500 and 503. 1.3.2. Install government provided workstation/servers within buildings 60, 64, 985, and bldg. 351 rooms 401, 500 and 503. 1.3.3. Install Lenel OnGuard server software onto the new workstations installed within buildings 60, 64, 985, and bldg. 351 rooms 401, 500 and 503. This includes all required 32ES licensing. 1.3.4. Migrate the 53 WG/AP database onto all new workstations/servers installed within buildings 60, 64, 985, and bldg. 351 rooms 401, 500 and 503. 1.3.5. Remove hardware programming for buildings/rooms not associated with facility domain that workstation/server was installed. 1.3.6. Route and terminate a new Cat6 cable from each new workstation to the existing Lenel controller associated with that facilities workstation/server within buildings 60, 64, 985, and bldg. 351 rooms 401, 500 and 503.