Site work for a water / sewer project in Ottawa, Ontario. Completed plans call for site work for a water / sewer project.

1. Undertake Pre and Post Cctv Inspections as Per City Standard F-4090 2. Locate Repair Section and Paint Work Area Limits for Utility Locates. 3. Obtain Utility Locates for Repair Replacement Section Before Starting Excavation Work. 4. Obtain Road Cut Permit From City, 5. Saw Cut Existing Asphalt Pavement of Suitable Dimensions to Undertake Repair Work. 6. Excavated Soils Are Not to Be Reused Within 30m of Water Course, 7. Cut Existing Pipe Section to Clean/true Vertical Line, 8. Remove and Dispose of Damaged Pipe Sections. 9. All Storm and Sanitary Sewers Are to Be the Size and Material Indicated. 10. Cover Material, From Pipe Spring Line to at Least 300mm Above the Top of Pipe, Should Consist of Opss Granular "a" Compacted to 95% Spmdo, 11. Sewer Trench Details Are to Be as Per City Standard S6 & 87. 12. Pipe Section for Replacement Shall Have a Saw Cut Horizontal Joint Connection Tolerance of No Greater Than 50 13. Granular a Bedding Shall Be Shaped to Accommodate Pipe Couplers at the Ends of the Sewer Spot Repair. 14. Pipe Joint Couplers Shall Be City Approved Product From Fernco or Mission With 31658 Clamping Bands. 15. Salvaged Granular and Earth Materials Shall Be Used for Backfill of Excavation to Road Subgrade. 16. The Road Structure Shall Be Reinstated to Match Existing Material Types and Thicknesses. Compact Road Granular Structure Materials to 100% Spmod, 17. Asphalt Mix and Placement Shall Comply With City Standards: F-3104, F-3106 & F-3030, 18. Curbs, Gutters, Sidewalks, Pathways and Relating Granular Bedding and Adjacent Grassed or Asphalt Areas Shall Be Reinstated to Match Existing Adjacent Material in Type and Thickness. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Question Acceptance Deadline: 2024/06/18 11:59:00 PM EDT