Renovation of an educational facility in Milpitas, California. Working plans call for the renovation of a educational facility.

***As of June 21, 2024. No bids received. rebid date not available at this time. Notice is hereby given that the Governing Board of the Milpitas Unified School District ("District") is inviting sealed bids to construct the following project: Student Nutrition Services Kitchen Equipment Installation ("Project" or "Contract"). The Project consists of 1) installing a dishwasher at the Central Kitchen, 2) installing a dishwasher, 2 combi ovens, and 1 tilt skillet at Milpitas High School, according to drawing and spec provided, 3) verify existing breakers can handle new load. Any claim by a Bidder of error in its bid must be made in compliance with Public Contract Code 5100, et seq. Contractor shall possess at the time of its bid, the following classification(s) of Contractor's California State license: A. All questions are to be directed in writing to Sandy Huynh at shuynh@musd.org. Interpretations or clarifications considered necessary by the District in response to such questions will be issued in writing by Addenda faxed, mailed, or delivered to all parties recorded by the District as having received the Contract Documents. Only questions answered by formal written Addenda will be binding. Oral and other interpretations or clarifications will be without legal effect. Each bid shall be made on the Bid Form prepared by the District in the Contract Documents and must conform and be fully responsive to all documents comprising the Contract Documents. The successful Bidder and its subcontractors shall pay all workers on the Project not less than the general prevailing rate of per diem wages and the general prevailing rate for holiday and overtime work as determined by the Director of the Department of Industrial Relations, State of California, for the type of work performed and the locality in which the work is to be performed within the boundaries of the District, pursuant to Labor Code 1770 et seq. Prevailing wage rates are on file with the District and are available to any interested party on request or online.. Bidders and Bidders' subcontractors shall comply with the registration and qualification requirements pursuant to Labor Code 1725.5 & 1771.1. The successful Bidder may substitute securities for any monies withheld by the District to ensure performance under the Contract, in accordance with the provisions of Public Contract Code 22300. Bonds. A bid bond by an admitted surety insurer on the form provided by the District, cash, or a cashier's check or a certified check, drawn to the order of the District, in the amount of ten percent (10%) of the total bid price, shall accompany the Bid Form, as a guarantee that the Contractor will, within seven (7) calendar days after the Notice to Proceed or other direction, enter into a contract with the District for the performance of the Services as stipulated in the bid. In addition, a one hundred percent (100%) Performance Bond and a one hundred percent (100%) Payment Bond will be required of the successful bidder. The District's Board reserves the right to reject any and all bids and/or waive any irregularity in any bid received. If the District awards the Contract, the security of unsuccessful Bidder(s) shall be returned within sixty (60) days from the time the award is made. Unless otherwise required by law, no Bidder may withdraw its bid for ninety (90) days after the date of the bid opening. The scope of work for the Project is as set forth below: Central Kitchen Dishwasher . remove and dispose existing warewash line. . Receive, uncrate, unload and delivery of equipment to dishroom. . install new line per drawing from right to left operation. . install 3 compartment sink and prerinse table with sink. . install CL44EN ventless model . clean out feed table . Connect electrical and plumbing from and to building. . perform start up once all trade done. . Aerowerks Factory Technician will weld, polish and interconnect Aerowerks equipment. This covers all inter electrical and plumbing. Milpitas High Dishwasher . Remove and dispose of the warewash line in kitchen. . Receive, uncrate, unload and delivery of equipment to dishroom. . Install new line per drawing, from left to right operation . Install new 3 compartment sink along with U shape pre-rinse table with sink. . Install new side loader for new CL44EN DW. install new out feed clean table. . Connect electrical and plumbing from and to building. . Perform start up once all trade done. . Aerowerks Factory Technician will weld, polish and interconnect Aerowerks equipment. This covers all inter electrical and plumbing. Milpitas High Tilt Skillet . remove and dispose existing unit . Install based on specs Milpitas High Combi Oven (2) . remove and dispose existing unit . Install based on specs . Run water line to and from equipment Work shall be completed by JULY 31, 2024. All questions are to be directed in writing to Sandy Huynh at shuynh@musd.org.