Site work for a playground / park / athletic field in Great Bend, Kansas. Completed plans call for site work for a playground / park / athletic field.

The City of Great Bend is accepting bids for the construction of a concrete slab-on-grade at Heizer Park located at 700 Heizer Street, Great Bend, Kansas. The work involved in the concrete for Heizer Park includes constructing a pad for the concrete slab-on-grade, pouring the concrete slab-on-grade according to MUSCO site requirements, concrete specifications and concept drawing. Final grading shall be installed after the concrete pour. Coordination shall be held with the electrical contractor for stub-up locations in the slab. It shall be the responsibility of the contractor to contact the respective utility companies for locates in the area. Contractors will be required to comply with all licensing, permitting, insurance, and bonding requirements of the City of Great Bend. In order to qualify as a potential Musco Mini-Pitch System building site, you must meet the following minimum requirements. o Asphalt or concrete pad. o If it's a new pad or overlay, we recommend allowing for 4 weeks of cure time prior to structural installation. o Pad must be a minimum 4 ft (1.22 m) longer and 3 ft (0.91 m) wider than what is needed for the Mini-Pitch System. For safety purposes, we recommend 10 ft (3.05 m) longer and 10 ft (3.05 m) wider. o Pad must be consistent and uniform in grade. o Pad must not have substantial defects (i.e. wide cracks, heaving, potholes, etc.), or other obstacles (i.e. drains, basketball poles, etc.) on playing surface. o Pad has to be accessible by telehandler for installation. o Access to electrical for lighting options. o See next page for electrical requirements. Electrical Requirements: Two circuits need to be brought to a single point on the mini-pitch (see diagram on the previous page); a 120v control circuit and a lighting circuit. The lighting circuit needs a minimum of 208v single phase, but other options are available. o 120v control circuit allows the lights to operate and be scheduled. The circuit draws less than an amp. A control transformer can be utilized in certain applications. o The lighting circuit can be 208v, 240v, 277v, 347v or 480v. The draw on the lighting circuit depends on the voltage (see table below). A single mini-pitch has two lights while a double has four lights. The values in the tables are for a single luminaire. All lighting circuits are single-phase. o A single mini-pitch has one connection point and can be on either sideline. o A double mini-pitch has poles on both sidelines and will need a feed brought to one sideline. In addition, there must be a conduit between the two poles to feed the second pole--similar to a switch leg