Site work for a fire / police facility in Fargo, North Dakota. Completed plans call for site work for a fire / police facility.

The City of Fargo wants to connect the new Fire Station #8 to our fiber plant on 64th Ave. S. Sealed proposals will be uploaded to fargond.bonfirehub.com/ for the purpose of evaluating costs and operating parameters. Please contact Bonfire at Support@GoBonfire.com for technical questions related to your submission. Fiber interconnect cable All Fiber optic cable insulation will have a maximum tensile load of 600 lbs. for installation and 200 lbs. for in-service load. The contractor will use a break-away swivel rated for 600 lb. break load for pulling all fiber optic cables. Minimum bends of small radii and twists that might damage fiber cable will be avoided, do not exceed manufactures bend radius. During the placement operation, fiber optic cable will not be bent in a radius less than 20 times the outside diameter of the cable, 10 times for fiber that is in service. Cables will be carefully inspected by the Contractor during placement operation to be certain that the fiber optic cable and inner duct are free from damage before placement. All instances of damaged cable or wire observed at any time whether prior to installation, occurring during construction, or discovered by test of observation subsequent to installation in plant, will be immediately called to the attention of the Engineer. The method of repair or correction of such damage will be in accordance with the written instructions of the Engineer. The Contractor will promptly repair such damage or make such corrections in accordance with such written instruction of the Engineer. Minor damage to the outer jacket of the cable or wire observed prior to or occurring during construction will be repaired in accordance with RUS Splicing Standard Bulletin 1753F401 (PC-2).