Site work and paving for a civil project in Renovo, Pennsylvania. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

For the Improvement of Certain Sections of I-80 Ramps in Clinton County, Greene Township, in the Commonwealth of Pennsylvania, State Route 8010, Section Rmp at the Following Locations: State Route 8010 From Segment 0010 Offset 1035 to Segment 0010 Offset 1389. State Route 8010 From Segment 0500 Offset 0722 to Segment 0500 Offset 1079. For the Improvement to 2 Off-ramps Having a Combined Construction Length of Approximately 711 Linear Feet (0.14 Miles), Involving Concrete Pavement Patching, Bituminous Milling and Overlay, Drainage Upgrades, Pavement Markings, and Other Miscellaneous Construction as Indicated on the Approved Drawings.. Project Cost Range: $500,000.00 - $999,999.99 Federal Project Status: PENNDOT Oversight NHS Structure Work: 0.00% Pre-bid Meeting: None Wage Rates: Yes Prequalification Requirement: Yes State Type of Work: Concrete Pavement Rehabilitation Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an Addendum. The deadline for submitting questions is 72 hours before the let date and time. For Emergency projects, the deadline is reduced to 19 hours before the let date and time. PennDOT - Exit 192 Ramps *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The description and location of the project is as follows: For the improvement of certain sections of I-80 ramps in CLINTON COUNTY, GREENE TOWNSHIP, in the Commonwealth of Pennsylvania, STATE ROUTE 8010, SECTION RMP at the following locations:STATE ROUTE 8010 from Segment 0010 Offset 1035 to Segment 0010 Offset 1389.STATE ROUTE 8010 from Segment 0500 Offset 0722 to Segment 0500 Offset 1079.For the improvement to 2 off-ramps having a combined construction length of approximately 711 linear feet (0.14 miles), involving concrete pavement patching, bituminous milling and overlay, drainage upgrades, pavement markings, and other miscellaneous construction as indicated on the approved drawings