Site work and paving for a mixed-use development in Victorville, California. Completed plans call for site work for a transportation facility; for paving for a transportation facility; and water / sewer project.

Any prospective bidder desiring an explanation or interpretation of the Contract Documents must make a written request to the Purchasing Section (email acceptable).All requests must be received on or before AUGUST 1, 2024 AT PST 12:00 P.M. This project entails the fifth phase of the reconstruction of the asphalt portions of Runway 17/35, consisting of the removal and replacement of approximately 120,000 square feet of structural runway pavement section to current FAA Design Standards. Ancillary to the runway reconstruction work, partial replacement of approximately 1,600 linear feet of existing asphalt runway shoulders shall be performed. Phase V includes improvements to the existing storm drainage system at the intersection of Runways 17/35 and 3/21, where approximately 1,800 linear feet of storm drain piping will be installed. Reconstruction of the Runway 3 blast pad pavement (88,000 square feet) shall be performed with the storm drain improvements along with improving an existing storm water basin. Lastly, Phase V will entail the reconstruction of approximately 35,000 square feet of taxilane PCC pavement. Time being of the essence, the work under this contract shall be diligently prosecuted to completion before expiration of 120 CALENDAR DAYS beginning on the date specified in the Notice to Proceed, which is expected to be September 23, 2024. Bid Proposals must be accompanied by a certified or cashier's check or a corporate surety bond in an amount not less than ten percent (10%) of the Bidder's total Bid Proposal amount. The Contractor shall pay SCLAA the sum of $4,000 per day for each and every calendar day delay in finishing the work in excess of the 120 CALENDAR DAYS specified below as Liquidated Damages. The Faithful Performance and Payment Bonds shall be for amounts not less than one hundred percent (100%) of the total amount of the Bid Proposal price named in the Contract. Bonds shall be issued by responsible corporate sureties, licensed and authorized to issue surety bonds in California. Each Bid Proposal submission must include all the Required Bid Documents and Proposal Forms (contained in Section C of the Contract Documents and listed on the Submission Certification form therein) and be accompanied by a certified or cashier's check, or by a corporate surety bond (Bidder's Bond) on the form included therein. Such check or Bidder's Bond is the Bidder's guarantee that he/she/it will, if an award is made in accordance with the terms of his/her/its Bid Proposal, promptly secure the insurance and endorsements, Faithful Performance and Payment Bonds and Guaranty required by the Contract Documents and execute a Contract for the work on the required forms (see sample forms in Section D of the Contract Documents "Contract, Bond and Guaranty Forms"). Said check or bidder's bond shall accompany and be enclosed in the same envelope with the Bid Proposal. Said Bidder's bond shall be in an amount not less than ten percent (10%) of the total amount of the Bid Proposal. The SCLAA reserves the right to reject any and all Bid Proposals and waive any irregularities or informalities in any Bid Proposal or in the bidding. The SCLAA further reserves the right to award the Contract to other than the lowest bidder if such action is deemed to be in the best interest of the SCLAA. Engineer's Estimate is approximately $4,400,000.00 (Four Million Four Hundred Dollars).