Demolition, site work, paving and new construction of a civil project in Oswayo, Pennsylvania. Completed plans call for site work for a bridge / tunnel; for paving for a bridge / tunnel; road / highway; road / highway; for the construction of a bridge / tunnel; and for the demolition of a bridge / tunnel.

For the Improvement of a Certain Section of State Highway in Potter County, Oswayo Township, Commonwealth of Pennsylvania, State Route 4025, Section A01. The Project Being Situated as Follows: on State Route 4025 From Segment 0020/offset 0114 to Segment 0030/offset 0292 Known as Brissie Hollow Road. For the Replacement of the Existing 33' Single Span Bridge Over Brizzie Hollow Run Using a 1-span P/s Spread Box Beam Bridge, Approach Work Consisting of Superpave Asphalt Mixture Designs for the Base and Wearing Course of the Bridge Approach Work, Driving Surface Aggregate for the Roadway, Guide Rail, and Miscellaneous Construction for a Construction Length of Approximately 550 Feet (0.10 Miles) as Indicated on the Approved Drawings. Project Cost Range: $1,000,000.00 - $2,499,999.99 Federal Project Status: PENNDOT Oversight Non-NHS Structure Work: 59.00% Pre-Bid Meeting: None Wage Rates: Yes Prequalification Requirement: Yes State Type of Work: Bridge Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an addendum. The deadline for submitting questions is 72 hours before the let date and time. For emergency projects, the deadline is reduced to 19 hours before the let date and time. PennDOT - Brizzee Hollow Run *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.