Renovation of a library in Colorado Springs, Colorado. Completed plans call for the renovation of a 67,735-square-foot library.

The Pikes Peak Library District invites qualified companies to submit a response to a Request for Proposal for Penrose Interior Renovation. Question Deadline 08/21/2024 at 2:00 PM MT Scope of Work 3.1. Service Specifications: 3.1.1. The specifications of this project shall be in accordance with the design and construction documents developed (Exhibit A) by Design Edge. 3.1.1.1. All walls are to be textured to match existing surrounds and painted Sherwin Williams "Panda White (SW 6147)" unless otherwise specified in writing. All division 9 items are to match plan specifications. Any deviations are to be approved by PPLD Project Manager. 3.1.1.2. All walls are to match the height specified on plans. 3.1.1.3. Any lighting change or new lighting installation shall be of LED. Other formats will not be accepted. 3.1.1.4. New walls shall not be built over existing carpet. Existing carpet must be stripped back to expose subfloor. 3.1.1.5. All hardware shall consist of brushed nickel finish. New door locking hardware shall accept only Schlage small format cores, to be keyed by PPLD. 3.1.1.6. All cove base shall match existing area. 3.1.2. Contractor shall take into consideration all dust, trash, noise, patron traffic areas, and site safety by means of tarp, rope off, plastic barrier, caution tape, cones or other means to prevent unnecessary liability to life, limb and eyesight. 3.2. Awarded contractor shall coordinate schedules with PPLD Head of Security and Facilities Project Manager. 3.3. All work shall be done to the highest of industry quality and be in accordance with Pikes Peak Regional Building Department. 3.3.1. Permitting must be completed prior to the start of any work or phase of this project. Inspections are to be completed prior to the start of any subsequent work. Documentation will be provided to PPLD Project Manager. 3.3.2. Change Orders are to be submitted to the PPLD Project Manager in writing for approval or denial prior to any changes. 3.4. Testing and cleaning of all materials specified in the completion of this work at no cost to the contractor. Any and all defaults found shall be the responsibility of the awarded contractor for correction. 3.5. The successful proposer shall be required to furnish all permits, equipment, tools, machinery, transportation, and other implements necessary to fulfill the provisions of this Contract. This includes but is not limited to all procurement and contracting requirement specifications included within.