Renovation of an educational facility in Lockport, New York. Completed plans call for the renovation of a educational facility.

**As of October 24, 2024, project was awarded to Singer-Kittredge, awarded amount is $23,607.94.** Reference Number 0000360203 1 ea WALK IN COOLER Custom cooler Interior Dimensions: 7'-1" x 6'-7" x 6'-10 5/8" Walls: 4" Class 1 - Foamed in place Urethane Exterior: Galvalume - Embossed 26 Ga Interior: Galvalume - Embossed 26 Ga Ceiling: 4" Class 1 - Foamed in place Urethane Type: Standard Attachment: Lock Down Exterior: Galvalume - Embossed 26 Ga Interior: Galvalume - Embossed 26 Ga Floor Application: 4" Class 1 - Foamed in place Urethane Type: Standard 1000# ERA Finish: Aluminum - Smooth Aluminum .100 Doors/Openings: Door: 34" x 78" Left Swing Out Recessed 0" with 0" Leveling Sand and 0" Tile & Grout. Frame: Exterior: Galvalume - Embossed 26 Ga Interior: Galvalume - Embossed 26 Gal A Division of Manitowoc FSG Operations, LLC Plug: Exterior: Galvalume - Embossed 26 Ga Interior: Galvalume - Embossed 26 Ga Door/Opening Accessories: Qty UoM Description 1 ea Door Closer - Kason 1094 (STD) 1 ea Handle - Kason 28 with Locking Assembly (STD) 1 ea Heater Wire, 1 Watt / FT 2 ea Hinge - Kason 1346 Brushed Chrome Adjustable / Spring Assisted (STD) 1 ea Light Fixture - Kason 1803 LED w/Bulb, Globe & Nightlight 120V 50/60Hz (STD) 1 ea Switch - Pilot Light Included 120/230V 50/60Hz (STD) 1 ea Thermometer - 2 inch Dial w/6' Lead (STD) 2.83 lf Threshold, Stainless Steel 14 ga 1 ea Refrigeration: Qty UoM Description 1 ea KPC48MOP-2EP PC48MOP-2EP, 208-230/60/1, 1/2HP, R448A, Pre-Charged, Air- Cooled, Hermetic Medium Temp Standard Plus Compressor Unit, Amps: 5.7, Ambient Temperature: 95 Includes Head Pressure Control Valve (Headmaster), Amps: 5.7, Ambient Temperature: 95 1 ea KAM16-052-1EC-PR-8 AM16-052-1EC-PR-8, 115/60/1, R448A, Medium Temp, Air Defrost, Standard Unit Cooler, Amps: 0.8 One year parts and labor included 1 ea 1/2 HP 2 - 5 YR Extended Compressor Warranty REJOICE REFRIGERATION Remove the old refrigeration equipment. Disconnect the electrical. Remove the old box and erect the new box. Pipe the new refrigeration equipment and drains. Run a new 208-230 circuit for the new condensing unit. Reconnect the 110 circuit for the lights. start system up and set controls. All old equipment must be removed from the job site and disposed of.