Site work for a water / sewer project in Palm Bay, Florida. Completed plans call for site work for a water / sewer project.

PD Shooting Tower Repainting Any uncertainty regarding the time a Submittal is received will be resolved against the Firm. The City reserves the right to waive proposal informality or technicality and to accept or reject any or all bids. Deadline for Questions September 10, 2024 @ 5:00 PM BASE SCOPE - Exterior Stairwell Tower, Railing, North Side Doors, and Concrete Floor Prepare, prime, and repaint the exterior stairwell tower, railing, and north side doors as indicated on attached drawings and in accordance with product manufacturer recommendation. i. The primer shall be Sherwin Williams B58T00604 Macropoxy 646 Fast Cure Epoxy Part A or equivalent as approved by the Owner. ii. The paint shall be Sherwin Williams B65W00351 Hi-Solids Polyurethane Semi-Gloss or equivalent as approved by the Owner. iii. When priming is complete, the paint manufacture representative will perform a site visit to determine if specifications were followed prior to final approval to move forward with the finish coat. Prepare, crack fill, and paint the concrete floor as indicated on the attached drawings and in accordance with product manufacturer recommendation. iv. Preparation shall follow manufacturer preparation instructions, which include, but are not limited to, removing all oil, grease, and loose material prior to crack filling and painting. v. The crack filler shall be 100167303 Miracle Bond Easy Flow Repair Epoxy or equivalent as approved by the Owner. vi. The paint shall be 2-coat application of Sherwin Williams B65A00060 ArmorSeal(R) Rexthane I Floor Coating, with 01273754 Rhino Hide Coarse Anti-Slip Additive or equivalent as approved by the Owner. vii. Each surface shall be cleaned and prepared as specified. The painting contractor is responsible for the finish of his work. Should any surface be found unsuitable to produce a proper paint or sealant finish, the project representative shall be notified, in writing, and not materials shall be applied until the unsuitable surfaces have been made satisfactory. Commencing of work in a specific area shall be construed as acceptance of surfaces and thereafter as fit and proper to receive finish. Contractor shall be fully responsible for satisfactory work.