Renovation of a municipal facility in Honolulu, Hawaii. Completed plans call for the renovation of a municipal facility.

Recoat metal roofs, replace gutters, and repair PV systems at the Central Services Division Baseyard Question Deadline 11/14/2024 at 4:00 PM HT CSD Baseyard needs metal roof repair and recoating, gutter replacement, and PV system repairs. See attachment Plans SK-1 to SK-4. Scope of Work Complete and in-place, the following list of repairs and replacements. Notify Contract Administrator if there are any deviations from the scope of work before proceeding. A. Metal Roof Repair and Recoating -Buildings No. 1, 3, and 5 1. Clean all roofs/surfaces to the requirements of the polyurethane base coating to be applied. 2. Apply polyurethane base coating. Henry SeamlesSEAL POLY+ coatings (base and finish) or approved equal. Manufacturer's written verification of applicator approval is required. a. Substrate Preparation: Pressure wash area to be coated to remove all debris & dirt to ensure proper adhesion. b. All loose paint, mastics and loose rust must be removed prior to the application of coating or sealant. Achievement of this condition may require scraping, wire brushing, power brooming, vacuuming, sweep blasting, sandblasting or other means, and shall always be performed observing responsible trade practices. c. Metal that has corroded to the point of being weak or broken must be patched replaced with like metal. d. Tighten or replace all fasteners where necessary. In no case shall joints or seams be allowed to separate greater than 1/16 inch. e. Any new metal must be clean and oil-free. Prime ferrous metal with Prime-Tek Metal primer at the rate of 1 gallon per 200 square feet.