Site work and new construction of a fire / police facility in West Sacramento, California. Completed plans call for the construction of a fire / police facility; and for site work for a fire / police facility.

Provide professional architectural, engineering and management services as a Criteria Architect/Engineer for the Design-build construction of the Sonoma Lake Napa Unit Headquarters and Glen Ellen Fire Station: Relocate Facility project. The project is to Design and Construct a new CalFire Lake Napa Unit Headquarters and Glen Ellen Fire Station. The Site comprises of an approximately 55-acre property located in a largely rural area of Sonoma County. The property is situated in the Sonoma Development Center (SDC) in the City of Eldridge, Sonoma County, California, west of Sonoma Highway 12. The headquarters will include, but is not limited to, an administration building, an EEC building, an auto shop, a service center, a training building, Captains Barracks, a training tower, a communications tower, a fire pump test pit, a generator/pump and storage building, a self-contained breathing apparatus recharge building, and a radio vault/repair building. The Fire Station will include, but is not limited to, an apparatus/barracks building, a dozer/mobile command center transport building, a fitness building, and a flammable storage building. Additionally, the scope of work includes vehicular bridges, a roadway constructed to local improvement standards with related traffic signals, interchange connection to Highway 12, helipad, site work and utilities. The project will include: the demolition of existing structures and roadways. The project will be designed and constructed for LEED Gold certification and Zero Net Energy (ZNE). Provide professional architectural and engineering design, and additional services as required for the above referenced Design-Build delivery of the project as a Criteria Architect/Engineer during the Performance Criteria and Design Build phases of the project. The responsible party for the Criteria Architect/Engineer must be an architect or engineer licensed to practice in the State of California (CA) and all work must be performed under and approved by a California-licensed design professional in the appropriate field. The services may include, but are not limited to, studies, programming, site analysis, geotechnical testing including soils analysis, boundary and topographical surveying, hazardous materials survey and investigation including abatement design (if required), master planning, California Environmental Quality Act mitigation measures (CEQA) support, fire alarm and low voltage systems, cost estimates, preparation of a design-build solicitation package including a Request for Qualifications (RFQ) and Request for Proposal (RFP) document including its evaluation criterion. Provide cost-benefit and life-cycle cost analysis, peer review, code compliance, energy and sustainable design including LEED and ZNE, systems confirmation, review design-build contractor documentation for conformance with RFP, support for selection of Design-build teams RFP, and general construction administration oversight. Technical and contract related questions should be directed to Michael Ton, Project Director III, at Michael.Ton@dgs.ca.gov. General questions and questions regarding the submission of RFQs should be directed to Chris Siembab, Contracts Analyst at Chris.Siembab@dgs.ca.gov. The estimated cost of construction is approximately $251,250,000.00 The firm selected for this work, including any team member, (individual, firm, subconsultants, subsidiary, or affiliates thereof) are precluded from participating on the Construction Project Management team, Environmental Consultant teams, Design-Build teams, or any/all competitively bid or qualification-based contract work or solicitations for other professional services in the interest of the project. The State encourages Small Businesses and Disabled Veteran Business Enterprises participation. To locate certified firms for subcontracting purposes, start on Cal eProcure. Click on "Small Business / Disabled Veteran Business Enterprise," then "Search for Certified SB/DVBE Firms." In the Certification Type, select any combination of Micro Business (MB), Small Business (SB), or Disabled Veteran Business Enterprise (DVBE). Additionally, there are fields that allow for a narrowing of the search. In the UNSPSC Classifications field, a search can be conducted in which the words "architectural" or "engineering" are used. If, for example, the UNSPSC Classification for Architectural Engineering (81101508) is selected, in addition to Disabled Veteran Business Enterprise (DVBE), Service Area (County) Sacramento (34), a number of DVBE certified firms that associate with the Architectural Engineering category are shown. The State reserves the right to terminate the selection proceedings at any time. Ten percent (10%) percent retention will be held for all progress payments made to consultant. When the estimated amount to be retained exceeds ten thousand dollars ($10,000.00), and the retention continues for a period of 60 days beyond the completion of phased services, upon written request and at the expense of the consultant, the State will pay the retentions earned directly to a state or federally chartered bank in this state, as the escrow agent. Pursuant to Labor Code 1774, the contractor and any subcontractors, regardless of tier, shall pay not less than the specified prevailing wage rates, as applicable, to all workers employed in the execution of the agreement. Website link to Labor Code 1774.