Site work for a municipal facility in Park City, Utah. Conceptual plans call for site work for a municipal facility.

Structural Engineering Design Services for Retaining Wall Replacement Kimley-Horn will provide the services specifically set forth below. Task 1: 30% Wall Structural Plans and Geotechnical Recommendations Wall Structural Plans Prepare site-specific design criteria for the retaining wall based upon the local authority having jurisdiction. Coordinate with geotechnical engineer to obtain design recommendations for the retaining wall. Coordinate with the design team to determine final facing of wall, location of pedestrian barriers, property lines and limits of excavation, as required. Develop preliminary structural calculations for the retaining wall. Submit 30% construction documents in electronic PDF format for the retaining wall. Plans will indicate location of the new wall, approximate pile spacing and lagging information and approximate location of proposed guardrail behind the new wall. A sheet set is noted below: Cover Sheet General Note Sheet Plan and Elevation Sheet Typical Detail Sheet The deliverable for this task, is a set of 30% drawings, in 11x17 format, delivered electronically. Geotechnical Recommendations Kimley-Horn will retain a qualified and licensed geotechnical engineer subconsultant that provide the following scope: Geotechnical recommendations for a new soldier pile concrete lagging wall built in front of the existing retaining wall. Recommendations for excavation behind the existing concrete wall while protecting the existing soil nail anchors from the soldier pile wall. Geotechnical backfill recommendations. The deliverable for this task is a geotechnical report with recommendations. Task 2: 100% Wall Structural Plans Develop final structural calculations for the retaining wall. Coordinate with the Contractor on any field conditions that may impact the new wall layout and design. Attend one site visit to coordinate with the Client and Contractor in the development of the construction documents. Submit 100% construction documents in electronic PDF format for the retaining wall. Plans will indicate location of the new wall, final pile spacing and lagging information and location of proposed handrail behind the new wall. The following additional coordination items will be included in the deliverable: Relocation of electrical boxes, roadway signs and electrical conduits to be noted on the plans as items to be coordinated by the Contractor. Removal of an abandoned drilled shaft foundation at the start of the wall (south side). Removal and replacement of concrete slab sections that are damaged or that will be impacted within the scope of work. A sheet set is noted below: Cover Sheet Survey Control Sheet General Note and Quantity Sheet Demolition Plan Plan and Elevation Sheet Structural Details 1 of 3 Structural Details 2 of 3 Structural Details 3 of 3 Soldier Pile Wall Data Table This task includes up to 20 hours of coordination calls or meetings with the Client and Contractor. It is assumed that the comments from the Contractor will not change the design intent or concept of the proposed wall. The deliverable for this task is a set of plans, in 11x17, signed and sealed, delivered electronically.