This is a service / maintenance or supply contract in Compton, California. Contact the soliciting agency for additional information.

For questions regarding the submission of this proposal, please contact: cflournoy@comptoncity.org INTRODUCTION The City of Compton Community Development Department - Successor Agency Division is soliciting proposals from qualified fencing companies to install custom fencing for Successor Agency and Housing Successor Agency-owned properties at various locations throughout the City on an as needed basis. SCOPE OF SERVICES The Successor Agency properties will need 7-foot chain link fencing with anchored post, stabilizing wires and stabilizing bars as needed. There needs to be a gate installed at the point of entry and there needs to be the flexibility in the contract to provide for the following on call services: 1. Fencing Repairs 2. Fencing Replacement On an as needed basis. Some properties have dilapidated pitch and rail fencing that will remain on-site unless it adversely impacts the contractor's ability to install the fencing. The fencing shall be installed in conformance to the Compton Municipal Code requirements and standards. Fences shall also comply with the following requirements and these requirements shall be detailed on the fencing plan submitted: 1. A seven (7) foot high chain link fence shall be placed around the entire perimeter of the site. 2. The fence shall be placed on or adjacent to the property line on all sides of the property. 3. A three (3) foot pedestrian lockable gate access door shall be placed swinging into the property from the alley. In the case that there is not an alley, the pedestrian gate shall be placed where access is provided from the street front of the property. 4. A gate shall be placed as an opening in the fence wherever there is a driveway approach entering the lot. The size of the gate shall not be larger in width than that of the driveway. The gate door shall be of the swinging type. 5. All materials to be new with standard galvanized finish. 6. Post will be embedded in concrete footings. Footings will be a minimum of 24 inches in depth, below grade.