Site work and paving for a road / highway in Fayetteville, North Carolina. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The work covered by this provision consists of clipping high shoulders and reconstructing the earth shoulder in accordance with Standard Drawing No. 560.01 and 560.02 of the Roadway Standard Drawings with the following exceptions: the width will be shown on typical sections, or to the existing shoulder point, whichever is nearer, as long as the desired typical is achieved. Seeding and mulching shall be performed upon completion of shoulder grading when earth borrow is used. This work shall be performed immediately after the resurfacing operations are complete as directed by the Engineer. Contract Id DF00495 WBS: 2025CPT.06.07.10261.1 & 2025CPT.06.07.20261.1 Route: Various County: Cumberland Location: Various Description: Widening, Resurfacing, Milling, & Pavement Markings MBE/WBE 1.0% / 1.0% The North Carolina Department of Transportation is requesting bids for the project listed below. The date of availability for this contract is November 4, 2024. The completion date for this project is April 24, 2026. All prospective bidders shall be prequalified as a Bidder or PO Prime Contractor with the Department of Transportation prior to submitting a bid, in conformance with Article 102-2 of the 2024 NCDOT Standard Specifications. Contractors who are not prequalified may obtain information and forms for prequalifying from the Contractual Services Management Section of the Contract Standards and Development Unit All required prequalification statements and documents shall be filed with the Contractual Services Management Section at least four weeks prior to the date of opening bids. Should you have questions, or need additional information, please contact Neil Butler, Division Proposals Engineer at jnbutler@ncdot.gov or Julio Williams, Assistant Division Proposals Engineer at jbwilliams7@ncdot.gov or either by phone at 910-364-0603. A Bid Bond (5%) is required in accordance with Article 102-10 of the 2024 NCDOT Standard Specifications. Contract Payment and Performance Bonds are required in accordance with Article 103-7 of the 2024 NCDOT Standard Specifications. NCDOT - Widening, Resurfacing, Milling, & Pavement Markings