Site work and paving for a road / highway in Hillsdale, New Jersey. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Project consists of one (1) Base Bid that consists of roadway improvements along Melville Road (from Craig Road to Wierimus Road). The work includes milling and paving, full depth pavement repair, depressed curb installation, curb drain and curb opening installation, upgrading inlets with bicycle safe grate/eco curb pieces and all other improvements depicted within the Contract Documents. All work on this contract must be completed within thirty (30) calendar days from issuance of a Notice to Proceed.. Proposals must be made on the standard proposal forms included with the Contract Documents in the manner designated in the Contract Documents, must be enclosed in sealed envelopes bearing the name and address of the bidder and the name of the project on the outside and be addressed to the Borough of Hillsdale, and must be accompanied by a statement of consent of surety from a surety company authorized to do business in the State of New Jersey and acceptable to the Owner and either a bid bond or a certified check drawn to the order of Borough of Hillsdale for not less than ten percent (10%) of the amount bid, except that the check shall not exceed $20,000.00. The successful bidder is hereby notified that a performance bond and labor and material (payment) bond for the full amount of this project is required. The right is also reserved to reject any or all bids or to waive any informalities where such informality is not detrimental to the best interest of the Owner, except as to those items which are deemed mandatory and non-waivable set forth in N.J.S.A. 40A:11-23.2. Further, the Owner reserves the right to abandon the project and reject the bids entirely if any legal or state or federal administrative action is taken against the Owner which could delay or jeopardize the project from commencing. The right is also reserved to increase or decrease the quantities specified in the manner designated in the Specifications.