Renovation of an educational facility in Durant, Oklahoma. Completed plans call for the renovation of a educational facility.

Bids Received: AI Roofing- $300,250 Coontz Roofing Inc-$604,000 Commercial Roofing- $491,333 Oklahoma Roofing- $711,775 L. Wallace Construction Co John Riggs- $772,959 Kennedy Roofing Nathaniel Grayson-$312,194.43 Crawford Roofing Inc-$392,175 All Seasons Contracting- 382,250 Multiple Roofs Project Project Specifications: Bloomer Gymnasium High & Low Roof *Remove existing membrane roofing system *Remove tar and gravel roof system down to decking *Fully adhere 2 in insulation board over roof deck *Fully adhere 60 mil TPO over roof area *Replace wood nailers around perimeter *Install 22-gauge metal cleat around perimeter *Install 24-gauge metal edge flashing around perimeter *Properly flash all roof penetrations Bloomer Sullivan Arena Low Roof * Remove existing membrane roof system *Remove tar and gravel roof system down to metal decking * Mechanically attach 1.5" insulation over roof area *Install tapered insula0 on for proper drainage * Fully adhere 60 mil TPO over roof area * Install new wood nailer around perimeter *Install new 22-gauge clip *Install new 24-gauge metal edge flashing * Install termination bar on brick wall *Install wall mounted counter flashing Hallie McKinney Low Roof *Remove existing membrane roofing system *Remove tar and gravel roof system down to decking *Fully adhere 2 in insulation board over roof deck *Fully adhere 60 mil TPO over roof area *Replace wood nailers around perimeter *Install 22-gauge metal cleat around perimeter *Install 24-gauge metal edge flashing around perimeter *Properly flash all roof penetrations Morrison West Low Roof *Remove existing wood structure and frame from roof area *Remove existing Duralast roof system from roof area *Remove tar and gravel roof system down to decking *Clean and prime concrete decking *Fully adhere 2" insulation over roof area *Fully adhere 60 mil TPO over insulation *Install new wood nailers around perimeter *Install new 22-gauge metal clip *Install new 24-gauge metal edge flashing