Remodeling of a conference / convention center in Addison, Texas. Completed plans call for the remodel of a 13,000-square-foot conference / convention center.

The Town of Addison ("Owner") has contracted with TSK Architects ("Architect") to assist the "Owner" in addressing its needs for the Addison Conference Centre Remodel Project. The Project is described as follows: Remodel the existing 13,000 SF facility to convert event space into office space and the Town's Council Chambers. Construction Services: The CMAR will serve as General Contractor to perform all work for the construction of the Project. The scope of Construction services will be determined based on the final Drawings and Specifications but may consist of one or more of the following areas of work or building components: site clearing, excavation, fill, select fill and backfill; site utilities; concrete sidewalks, curbs and gutters; asphalt paving, rough and finish grading, topsoil and seeding; chain-link fencing and gates, concrete piers, concrete slab-on-grade, concrete masonry (CMU) interior walls, cast stone lintels, limestone and plaster exterior veneer, concrete floor topping, structuralsteel frame (columns and joists), metal roof deck, metal wall and roof panels, miscellaneous metals and metal fabrications; rough and finish carpentry, millwork and casework; damp proofing and waterproofing, caulking and sealants, thermal insulation, flashing and sheet metal, metal soffit panels, metal, roofing, modified bitumen roofing; wood doors, metal doors and frames, aluminum doors and frames, glass and glazing (including security glazing), finish architectural hardware, acoustical ceilings, resilient flooring and base, carpeting, metal studs and support systems, gypsum drywall, painting and special floor coatings, interior and exterior signage; metal louvers and miscellaneous specialties; detention furnishings, equipment, security hollow metal wall and ceiling system, locks and locking systems, and security electronics; sound enhancementsystems; kitchen equipment; laundry equipment, fire protection; lightning protection; and mechanical, plumbing and electrical systems, and any other requirements set out in the Contract Documents.