Site work for a municipal facility in Warrenville, Illinois. Completed plans call for site work for a municipal facility.

The project is to construct an approximately 2.5' x 12' precast concrete monument sign, with a recessed light and all incidental and collateral work necessary to complete the project. Each bid shall be accompanied by a bid bond, bank draft, cashier's check or certified check payable to the order of the City of Warrenville, Illinois, in an amount not less than ten (10) percent of the amount of the total contract price, as a guaranty that the bidder will execute the contract, if it is awarded, in conformity with the bid form. All questions must be submitted in writing to David Romero, dromero@warrenville.il.us, not later than 5:00 P.M. on Tuesday, October 1, 2024 Review of proposals and acceptance or rejection of proposals shall be governed by the terms of the Request for Proposals. The successful bidder will be required to furnish Performance and Payment Bonds and Labor and Material Payment Bonds on forms provided in the Specifications and Contract Documents, each in an amount equal to 100 percent of the contract price. All bids shall be made on the forms provided and will be made part of the contract documents to be executed with the Owner. Description. This work shall consist of providing all labor, materials, and equipment necessary to fabricate, furnish and install the masonry sign and its associated lighting unit, and including the concrete foundation. All work shall be per the details shown on the plans and as directed by the Engineer. All components as shown on the plans, including but not limited to precast coping, anchors, stone veneer, block, mortar, flashing and weep holes shall be included in the cost of the masonry sign. All concrete foundations as shown on the plans, including but not limited to structural excavation, concrete structures, reinforcement bars, reinforcement bars epoxy coated, drilled shaft concrete foundations with bells shall be included in the cost of the masonry sign. This work shall consist of the material, labor, and equipment necessary to furnish and install the LED sign lighting unit and solar panel as indicated on the plans, according to the type specified. The sign lighting unit and solar panels shall be installed on the monument sign complete with prewired cable, weatherproof bar fittings, adjustable mounting brackets and frames, batteries, battery box, sockets, solar panel, charge controllers, pre-programmed software and on/off switches to make ready for use and in accordance with the plan details and the following requirements. This work shall be performed according to applicable sections of Division 800 of the State Specifications. This is a proprietary item which will be sole sourced for this project.