Site work and paving for a road / highway in Dayton, Texas. Completed plans call for site work for a road / highway; and for paving for a road / highway.

SCOPE OF WORK The City of Dayton is accepting bids for paving of the road from East Waring Street to North Colbert Street. The contractor shall provide all labors, materials, equipment, and supervision required to complete the repaving of the listed road. project Timeline: Completion within 2 months of bid award. 1. Pre-Construction Activities: Conduct a site inspection and survey to assess existing conditions. Develop and submit a detailed project schedule, including start and completion dates. Obtain all necessary permits and approvals from local authorities. Coordinate with local utilities to identify and protect existing underground infrastructure. 2. Surface Preparation: Remove existing pavement as necessary, including milling or full-depth removal where specified. Dispose of all removed materials in accordance with local regulations. Repair any sub-base or base failures, including excavation, grading, and compaction as required. 3. Pavement Installation: Supply and install a new asphalt pavement layer, including base, binder, and surface courses as specified. 1. 8" base with a concrete powder mixture Ensure proper compaction and smoothness of the new pavement in accordance with industry standards and project specifications. Apply tack. coat between pavement layers as required. Address any transitions, tie-ins, and joint construction with adjacent pavements. Raise manhole covers and valve covers to new surface as required 4. Markings and Signage: Reapply pavement markings, including centerlines, lane markings, crosswalks, and other required traffic control markings. Install or adjust road signage as specified in the project documents. 5. Quality Control: Perform all necessary testing to ensure compliance with project specifications, including but not limited to, compaction tests, material quality tests, and smoothness tests. Provide documentation of all test results and any corrective actions taken. 6. Site Restoration: Restore all disturbed areas, including but not limited to, grassed areas, sidewalks, and landscaping. Clean up and remove all debris, materials, and equipment from the site upon project completion. 7. Post-Construction: Conduct a final inspection with the project manager or designated representative with City approval. Address any punch list items identified during the final inspection. Provide a warranty for the work performed as specified in the contract. The City of Dayton reserves the right to reject any or all proposals and to accept any proposal deemed most advantageous to the city.