Site work and paving for a road / highway in Dresden, North Dakota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Proposed Work Consists of 9.9550 Miles of Milling, Hma Overlay, & Incidentals Located Cmc 1006, Jct Cmc 1017 (Wales) N to Jct Cmc 1013 (Hannah) And Involves Approximately: 1 L Sum Contract Bond; 1493 Cy Common Excavation-subcut; 1872 Ton Aggregate Base Course Cl 5; 25218 Gal Tack Coat; 7884 Gal Fog Seal; 146489 Sy Milling Pavement Surface; 27597 Ton Rap - Superpave Faa 43; 318 Ea Cored Sample; 1518 Ton Pg 58s-28 Asphalt Cement; 1 L Sum Mobilization; 500 Mhr Flagging; 2102 Unit Traffic Control Signs; 500 Ea Tubular Markers; 250 Hr Pilot Car; 1 Ea Bituminous Laboratory; 1 Ea Contractor's Laboratory; 4480 Sy Geosynthetic Material Type G; 60915 Lf Short Term 4in Line-type Nr; 127335 Lf Pvmt Mk Painted 4in Line. Bid Range - $2,500,001 to $3,000,000 Time - September 27, 2025 Prequalification is required for all bidders submitting a bidding proposal form. Prequalification is required annually. Prequalified contractors who wish to renew their prequalification must submit a complete "Contractor's Prequalification Statement" by July 1 of each calendar year. Bidders who are not currently prequalified must submit a complete "Contractor's Prequalification Statement" at least 10 business days prior to the date of the bid opening. Information is available from the Construction Services Division of the North Dakota Department of Transportation. A bid guarantee is required by Section 24-02-20, NDCC. The bid guarantee may be a bid bond equal to 10 percent of the full amount of the bid or a cashier's check of the bidder on a solvent bank equal to 5 percent of the bid. Bid bond shall be on the department form SFN 14196. Prior arrangements may be made with the department to file bid guarantees in advance. The right is reserved to reject any and all proposals, to waive technicalities, or to accept such as may be determined to be for the best interests of the state. NDDOT - 23760 - Milling, HMA Overlay, & Incidentals *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.