Renovation of a water / sewer project in Topeka, Kansas. Completed plans call for the renovation of a water / sewer project.

DESCRIPTION OF MAJOR UNITS OF WORK: Submittal phase services including shop drawings, fabrication, and delivery; and start-up phase services including installation inspection, performance testing, training and other field services listed in these documents for the emergency backup power system. The emergency backup power system shall consist of the emergency generators, transfer switches, associated electrical gear, wiring and conduit. The City of Topeka is soliciting bidders for the installation of the backup power for the UV disinfection unit at Oakland WWTP. The emergency backup power system shall consist of the emergency generators, transfer switches, associated electrical gear, wiring and conduit. Submittal phase services include shop drawings, fabrication, and delivery; and start-up phase services include installation inspection, performance testing, training and other field services. BID SECURITY REQUIREMENTS: All bids must be accompanied by a cashier's check or a bid bond for not less than five percent (5%) of the amount bid, made payable to the City of Topeka, Kansas. The original bid security shall be in the office of Contracts and Procurement before the 2:00 closing date. Question Deadline 11/21/2024 at 5:00 PM CT All questions about the meaning or intent of the Contract Documentsshall be submitted only through the City of Topekas e-Procurement System at least 10 calendar days prior to the opening of Bids. Copies of the project drawings and project manual are on file and open for public inspection at the office from which they may be obtained and the office of the Contracts & Procurement Division. Electronic Copies: No Charge. Electronic copies (PDF's) of the bid documents (plans and specifications) and any addenda are available using the Topeka e-procurement system, TOPEKA ePro. Register at online. The work is generally described as emergency power improvements for the UV Disinfection Building. Specifically, the project includes the following tasks: Install two 700 kW emergency generators on new concrete pad. Install two automatic transfer switches serving the existing motor control centers. Install a new section of motor control center, MCC-8B. Install new automatic transfer switch serving new panel H8. Install new panel H8 serving emergency controls.