Renovation of a theater / auditorium in Edinburg, Texas. Completed plans call for the renovation of a theater / auditorium.

Edinburg Municipal Auditorium Roof Repairs - The Edinburg Municipal Auditorium is in need of roof repairs to prevent water penetration. The City of Edinburg reserves the right to refuse and reject any or all proposals and to waive any or all formalities or technicalities and to accept the proposal deemed most advantageous to the City, and hold the proposals for a period of 90 days without taking action. Question Deadline 11/15/2024 at 3:00 PM CT you may contact Criselda Lozano, Purchasing Manager, please submit your questions via OpenGov Procurement at the website. Re-roof the existing Modified Bitumen (Mod. Bit) Roof System and Built-up Roof system over the City of Edinburg Municipal Auditorium with a Spray Polyurethane Foam System and Fluid Applied Elastomeric Roof Coating. Approximate area is 9,000 ft 2 . Scope includes and is not limited to: o Mask and protect all floors from any spills, overspray, and/or debris o Mask all windows, wood shutters, doors, and all wood trim that will not be worked to protect them from any spills, overspray, and or debris o Existing roof materials shall be securely fastened prior to the coating being applied o All roofing surfaces shall be free of any loose material, grease, soft asphalt, and or other o Pressure wash the existing roof top area as necessary to ensure optimum adhesion of the new fluid applied system o Treat all seams and over-laps of the existing Mod. Bit roof system with fluid flashing and an embedded reinforcing fabric for a watertight seal on parapet walls only o Apply a Bleed Block sealer throughout the entire roof at a rate of 1.5 gallons per every 100 square feet to prevent any bitumen or asphalt biproduct from leaching up into the new roof coating system. On parapet wall only o Spray apply a base coat of an elastomeric acrylic coating at rate of 1.5 gallons per every 100 square feet. On parapet walls only o Spray apply an intermediate coat of an elastomeric acrylic roof coating at a rate of 1.5 gallons per every 100 square feet. On parapet walls only o Spray apply a topcoat of an elastomeric acrylic roof coating at a rate of 1.5 gallons per every 100 square feet for a final total of 5.5 gallons of fluid applied roof coating per every 100 square feet. On parapet walls only o Fill in low areas of the roof with polyurethane foam to minimize ponding water. o Spray apply a 3 lb density polyurethane foam over the existing cleaned gravel roof at a rate of 1.5 inches thick plus or minus 1/4 inch. o Spray apply a high solid elastomeric acrylic coating over all the new urethane at a rate of 4.5 gallons per every 100 square feet o Seal all parapet walls and roof penetrations with the same elastomeric acrylic roof coating. o Clean premises daily and haul away debris once the job is complete.