Renovation of a mixed-use development in Lexington, Kentucky. Completed plans call for the renovation of a educational facility.

This Request for Proposals (RFP) is issued to solicit proposals from qualified, experienced, financially sound, and responsible firms to provide all materials, labor, equipment and installation to complete the Doors, Frames, and Hardware for Cancer Center and Advanced Ambulatory Center in Lexington, Kentucky. Scope of work to align with Trade Categories 08A8, and 08D8 Deadline for Written Questions 3 p.m. Lexington, KY Time on 11/26/2024 This information shall be transmitted via fax or e-mail to: Ken Scott Procurement Services University of Kentucky 322 Peterson Service Building Lexington, KY 40506-0005 Phone: (859) 257-9102 Fax: (859) 257-1951 E-mail: kenneth.scott@uky.edu o The Contractor who is chosen to install the product must provide a turn-key installation which includes clean-up from associated installation. o The Contractor who is chosen must provide a single point of contact during the project period. This single point of contact will have full responsibility for ensuring the project requirements are completed. o Provide complete all permitting, engineering, labor, materials, supplies, tools, appliances, equipment, services, etc., necessary for the construction Doors, Frames, Hardware for Project #2563.00 - University of Kentucky, Cancer Center and Advanced Ambulatory Center, Lexington, Kentucky, as set forth in the specifications and as shown on the drawings as prepared by Champlin Architects, THP Limited, AEI Engineering, and approved by the Capital Construction Procurement Section and the Capital Project Management Division and under the terms and conditions of this RFP. o Proposal shall include filled out bid breakdown forms as part of the offeror's proposal. To be considered a responsible Offeror, the Contractor or sub to the contractor must have successfully completed previous comprehensive doors, frames, and hardware projects with similar size, scope of work, and quality requirements to the project being quoted. Details of the requirements are attached to this RFP containing the drawings for the Project. These drawings and specifications are to be considered as included in this scope and they supplement with the details of the work. They do not relieve the Contractor from any contractual obligations required in the drawings and specifications either printed or included electronically. The Scope of Services is further defined in Section 7.0, Scope of Services, in this RFP.