Renovation of a municipal facility in Toronto, Ontario. Conceptual plans call for the renovation of a municipal facility.

Reference Number 0000282027 Question Acceptance Deadline 2024/11/26 02:00:00 PM EST Bid Intent Deadline 2024/11/26 02:00:00 PM EST Colliers Project Leaders is seeking a Prime Consultant to provide Mechanical Services. This project is being undertaken at 145 Sir William Hearst Avenue, North York (B12387), Building C. The intent of this project is to investigate the clogged floor drains within the basement electrical room of Building C (B12387) at the Downsview Office Complex. Comprehensive: The study shall be comprehensive in scope and include an investigation of all applicable building system elements to address all unknowns pertinent to any recommended future work. As studies are exploratory in nature, it is the responsibility of the proponent to advise the Owner if and when it becomes apparent that investigation of additional building system elements may be warranted beyond that stated in the original scope in order to comprehensively address all unknowns of interest to the study. Accurate: To ensure study findings are fully informed and accurate without errors or omissions, the proponent shall interview key facility personnel when conducting information gathering. Key personnel are those with any or all of historical knowledge of the site; knowledge of past changes, modifications, or repairs to the building system elements of concern; and understanding of or responsibility for day-to-day operations and/or maintenance of the building system elements of concern. The proponent shall solicit input from the Project Manager, Facility Manager, and Ministry representative (if applicable) on key personnel during the study kickoff meeting. The proponent shall subsequently provide a written list of all key personnel identified, showing the name of each individual, for review and approval by the Project Manager and stakeholders. The proponent is responsible to keep a record of all interviews conducted, to be made available on request. The following activities and deliverables must be overseen by a qualified professional as identified in the proponent's submissions (see Table 7.3.1): 0 Visual inspections Intrusive testing and specification development Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.