Renovation of a mixed-use development in Balcarres, Saskatchewan. Completed plans call for the renovation of a educational facility.

The work involves improvements to the Pesakastew School under the Green and Inclusive Community Buildings (GICB) program. Improvements include: Accessibility improvements to parking, signage, doors and furniture. Construction of a new universal washroom. Electrical upgrades including a new roof-mounted solar photovoltaic power system. Security upgrades including door access and closed-circuit television (CCTV) system. Heating, ventilation, and air conditioning (HVAC) upgrades for demand-controlled system and improvements to the zoned heating system. 5-year mechanical maintenance agreement. Code compliance upgrades including replacement of an air handling unit, addition of access panels at mechanical wall penetrations, replacement of a water heater in the north wing, and addition of a heat recovery ventilator. Documents can be obtained online. Question Deadline: Thu Dec 5, 2024 5:00 PM (CST) 1 This section of the Work includes, but is not necessarily limited to, the following: .1 Demolition, removal completely from site, and disposal of all identified components, materials, equipment and debris .2 Selective demolition to allow new walls, bulkheads, ceilings and other materials to meet existing construction as indicated .3 All material from demolition shall be removed from site immediately with no salvage, selling, sorting or burning permitted on site .4 Retain items indicated on drawings for re use in new construction .1 General: Network of controllers comprising of MCU(s), LCU(s), ECU(s) or TCU(s) to be provided as indicated in System Architecture Diagram to support building systems and associated sequence(s) of operations as detailed in these specifications. .1 Provide sufficient controllers to meet intents and requirements of this section. .2 Controller quantity and point contents to be approved by Owner/Engineer at time of preliminary design review. .2 Controllers: stand-alone intelligent control units: .1 Incorporate programmable microprocessor, non-volatile program memory, RAM, power supplies, as required to perform specified functions. .2 Incorporate communication interface ports for communication to LANs to exchange information with other controllers. .3 Capable of interfacing with operator interface device. .4 Execute its logic and control using primary inputs and outputs connected directly to its onboard input/output field terminations or slave devices, and without need to interact with other controllers. .1 Secondary input used for reset, such as outdoor air temperature, may be located in other controller(s). .3 Interface to include provisions for use of dial-up modem for interconnection with remote modem: .1 Dial-up communications to use 56 Kbit modems and voice grade telephone lines. .2 Each stand-alone panel may have its own modem or group of stand-alone panels may share modem.