Demolition, site work and addition to an educational facility in Conway, South Carolina. Completed plans call for the addition of a 723-square-foot educational facility; for the demolition of a educational facility; for site work for a educational facility; and 3,770-square-foot educational facility.

*As of April 09, 2026, this project has been Under Construction since January of this year, 2026. New construction of a 3,770 sq. ft. 3-bay addition with a 723 sq. ft. 4th bay as an alternate to the existing HGTC Automotive Technology Facility on the Conway Campus in South Carolina. The building will be masonry, with brick pillars and façade on the front of the building. A new entryway will be constructed. The roof system will be PVC fully adhered membrane on a low slope roof and a Standing Seam metal system on the pitched roofs. The existing roof will be reroofed with a Standing Seam metal roof system. A toilet room will be added in the existing building constructed of metal studs and gypsum board. Interior finishes include acoustical ceiling system, epoxy flooring, LVT flooring and paint. Wood doors, overhead coiling doors, hollow metal doors and frames and hollow metal interior windows. Exterior windows and entry door are aluminum storefront. HVAC, electrical and plumbing. *The original solicitation for design firm is listed below for historical reference. HGTC is seeking A/E services to construct an expansion to it automotive training facility located on the Conway campus. The project is to construct two (2) additional bays or approximately 4,000 sf of instructional space comprised of a block building structure w/brick facade on the front. A/E services will include schematic design, design development, preparation oof bid package, construction oversite and close-out of project. Project Location: Conway Bldg. 1400 All questions & correspondence concerning this Invitation shall be addressed to the A/E. A/E NAME: PMH-Croft Architects & Engineers A/E CONTACT: Diane Price EMAIL: dprice@pmhcroft.com TELEPHONE: (843) 497-0272 Anticipated Construction Cost Range: $1,500,000 to $2,000,000 Experience working on SC State construction projects. Prior experience with designing automotive instructional spaces. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The method of Contractor Selection has not been Determined at this time.