Site work and paving for a road / highway in Lemoyne, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

2025 Roadway Project - Contract 2 - Paving Question Deadline 01/17/2025 at 12:00 PM ET Deadline to submit Questions Only those questions submitted online Portal regarding the project will not be acknowledged. The Contracts are subject to the following: the Pennsylvania Prevailing Wage Act conditions; the Federal Occupational Safety and Health Act of 1970 (OSHA) conditions; the Pennsylvania Act 229 of 2002; the Pennsylvania One Call Act, also known as the Underground Utility Line Protection Law, Act 287 of 1974, as amended; the Pennsylvania Human Relations Act 222 Condition; requirement of a noncollusion affidavit; the non-discrimination in Employment/Contract Compliance Regulations Conditions; and the Public Works Employment Verification Act. Lemoyne Borough Council reserves the right to accept or reject any or all Bids. The Contract No. 2 work will include, but not necessarily be limited to, approximately 3,895 SY milling, and 665 TON bituminous wearing course. A certified check or bid bond for the amount of 10 percent of the total bid shall be required. Bonds are to be issued by a surety licensed to do business in the Commonwealth of Pennsylvania. This project shall include furnishing all labor, equipment, material, and appurtenances to complete all work in accordance with the Contract Documents. The work will include, but not necessarily be limited to, the following, as identically numbered in the UNIT PRICE SCHEDULE: 1. Mobilization and Demobilization (1 LS) 2. Traffic Control (1 LS) 3. Milling -Profile mill full width, up to 2 depth (3,895 SY) 4. Paving fabric, complete in-place (3,895 SY) 5. Base Repair: Sawcut, excavate 4 depth, remove material, place 4 depth, Superpave Asphalt Mixture Design Binder Course, 25mm, PG 64-22, 0.3 to 3 million ESALs, complete in place (125 SY) 6. Superpave Asphalt Mixture Design Leveling Course, PG 64-22, 0.3 to 3.0 Million ESALs, 9.5 mm, SRL - M, complete in place (205 TON) 7. Superpave Asphalt Mixture Design Wearing Course, PG 64-22, 0.3 to 3.0 Million ESALs, 9.5 mm, 1.5 Depth, SRL - M, complete in place (460 TON) 8. White Thermoplastic crosswalk marking, 6 line width (52 LF) 9. Thermoplastic Stop Bar 24 line width (12 LF) 10. Single yellow painted lines, 4 line widthNO PARKING areas (60 LF) 11. Thermoplastic Speed Table Pavement Markings, 12 line width (210 LF) 12. Traffic Sign W17-1 and W13-1P, complete in place (45 SF)