Site work, paving and new construction of a bridge / tunnel in Rochester, New York. Completed plans call for the construction of a bridge / tunnel; for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

Bridge Replacement Project This work shall consist of furnishing and placing concrete for structures and furnishing footing concrete, including steel reinforcement, as indicated in the contract documents or as directed by the Engineer. This work shall consist of grading, cleaning and reshaping existing ditches so that adequate, unobstructed free flowing drainage is restored. The Contractor shall: A. Grade, clean and reshape the existing ditches including removal of excess material as ordered by the Engineer to restore drainage. B. Shape the backslope in cut sections up to the final elevation of the nearest edge of pavement. This work shall consist of preforming various survey operations in accordance with the contract documents and as directed by the Engineer. All provisions of NYSDOT Standard Specifications, Section 625, latest revision, shall apply for Survey Operations with the following additions. The work shall be performed by, or under the direction of, a Professional Land Surveyor who is licensed and registered to practice in New York State. This work shall consist of furnishing, installing and certifying Steel Pin & Cap Right-of-Way Markers and Steel Pin Property Corner Markers in accordance with the contract documents and as directed by the Engineer. All provisions of NYSDOT Standard Specifications Section 625, latest revision, shall apply for Steel Pin & Cap Right-of-Way Markers and Steel Pin Property Corner Markers with the additions. The contractor shall cut existing asphalt pavement, concrete pavement, asphalt surface course, or asphalt concrete overlay on concrete pavement at the locations indicated and detailed on the plans and as directed by the Engineer.