Renovation of a detention facility in Jackson, Michigan. Completed plans call for the renovation of a detention facility.

Project Scope of Work: o The MDOC is obtaining a new WIFI cabling system and installation and connection of owner provided Wireless Network equipment. o The scope of this project is the provision and installation of the cabling, raceway and systems as described below, on the drawings and in the detailed specifications. o Electrical Power o Provide and install power circuits where shown on the electrical drawing and as described in the specifications. o Label all outlets and update labels in electrical panels. o Systems Grounding o Install ground bars and bond equipment to the ground bars as shown on the drawings and as described in the specifications o Wireless network equipment shall include: o Wireless Access points -(WAPS) and their enclosures. Interior and Exterior. All these devices and their enclosures are provided by owner, Contractor installs. o Contractor shall install WAPS and WAP enclosures at each building. Owner will provide the WAPS and Oberon type enclosures. o WIFI cabling scope shall include but not be limited to: o Provide, install, terminate, test and label a complete CAT-6A cabling infrastructure to support a new WIFI (wireless) network. o Provide, install, terminate, test and label a complete CAT-6 cabling infrastructure where noted to transition existing cables to racks or cabinets. o Provide and install raceways and cable supports as specified and as required to support all new cabling and Wireless Access Points. o Upgrade and/or add communications racks and equipment to the racks. Make change as noted on the drawings and specifications o See drawings and specifications for raceways and pathways. o The contract shall include the installation and connection of Wireless network equipment. Work shall include: o Providing a 40' long Conex box onsite for the duration of the project. Coordinate location with the owner. o Moving of WAPS and enclosures from the delivery truck to the owner's storage building. o Moving of WAPS and enclosures from the owner's storage location to the actual building where they will be installed. o Installation of all wireless network equipment. this includes: Mounting of owner provided WAPS and enclosures in all buildings. Mounting of owner provided WAPS on the building exterior or poles at the site. Owner will install Ethernet Switches and provide/install Patch cables at the switches o Provide and install CAT-6A patch cords at each WAP. See specifications for types and lengths required. o Owner will provide and install CAT-6A patch cords at the Ethernet Switches o Verify connectivity lights on all WAPS after the owner installs the Ethernet Switches. o Label WAP patch panels with the WAP number as shown in the drawings and specifications. o The owners (and their Cisco Partner) work on the WIFI network equipment includes: o Obtaining of Wireless network equipment and storage at their warehouse in Michigan. o Deliver of WAPS and WAP enclosures to the site. o Configuration of all wireless network equipment per owners' recommendations o Labeling of WAPS with WAP number and labeling outside of WAP enclosure with WAP number and building where it is to be installed. ALL questions should be emailed to Bret Emerson at bids@commtechdesign.com no later than 2:00 p.m., Eastern on January 17, 2025. 5% Bid Security: Required Project Name and Location (Include Street Address): Wi-Fi Cabling Infrastructure - Parnall C.F. - 1780 E. Parnall, Jackson, MI 49201