Renovation of a mixed-use development in Columbia, South Carolina. Completed plans call for the renovation of a educational facility.

The purpose of this solicitation is to competitively obtain bids to acquire supplies, services or equipment which complies with the enclosed description and/or specifications and conditions for Richland School District Two for the following project: Serving Lines Replacement at Windsor Elementary School and Dent Middle School, 24-2528. Specifications Richland School District Two is accepting bids from qualified contractors for the turn-key delivery and installation of serving line replacements at two (2) schools. Pricing should include one year parts and labor warranty with five year compressor warranty and shipping charges. All units must be LTI/Specline. No substitutions will be accepted. All units are to be delivered and set in place at the following schools: Windsor Elementary School - 9800 Dunbarton Drive Columbia, SC 29223 Dent Middle School - 2721 Decker Blvd, Columbia, SC 29206 District staff will remove all existing equipment. The District will award to the overall lowest and responsible bidder. Richland Two reserves the right to order additional items identified in this contract as needed until June 30, 2025. Contact Information Project Contact: SHATEKA HOLLIDAY PROCUREMENT SPECIALIST 124 Risdon Way Columbia, SC 29223 Email: sholliday@richland2.org Phone: (803) 738-3298 Question Deadline 01/24/2025 at 11:00 AM ET The Bidder must provide the Section(s), Subsection(s), Paragraph(s), and page number(s) that identify the conditions or requirements questioned, in writing, via electronically. The District may ask any or all respondents to elaborate or clarify specific points or portions of their response. Clarification may take the form of written responses to questions or meetings to discuss the solicitation and/or the participant's response. No pre-bid conference is scheduled. Bidders are encouraged to explore the project location to familiarize themselves with the needs of the area and the constraints of the project space. District Rights The school district reserves the right to reject any offer that contains prices for individual items or services that are inconsistent or unrealistic when compared to other prices in the same or other offers if such action would be in the best interest of the school district. Ambiguous offers which are uncertain as to terms, delivery, quantity, or compliance with specifications may be rejected or otherwise disregarded. The right is reserved to reject any offer in which the delivery time indicated is considered sufficient to delay the operation for which the project or service is intended. The school district reserves the right to waive any instruction, condition, or minor specification when considered to be in the best interest of the school district. Windsor Elementary School :- Provide new LTI/Specline food serving counters along with ancillary items (APPENDIX III ) to accompany the new serving line. Serving lines and ancillary items to be delivered and installed by the kitchen equipment contractor. Items shall also include the following features and options: Item 1: Hot Food Counter- (Qty 1) LTI/Specline TW5-CPA (5) hot wells, recessed top, open base rear, s.s. top and tray slides, molded fiberglass body, 10" solid ribbed tray slide, 4" cutting board, pivot front "GAG" style sloped front protector guard with glass top and front, that can be opened fully, LED lights, drains and manifold, 5" casters, 34" height, tray slides mounted at 28" AFF. Plugs into existing 14-20R receptacle, Color to be determined. Item 2: Cold Counter- (Qty 1) LTI/ Specline 60-CFMA Tempest air, recessed top 4 pan size, forced air cold counter, open base rear, stainless top and tray slides, molded fiberglass body, 10" solid ribbed tray slide,GAG protector guard with full glass, LED lights, drain, 5" casters, 34" height with tray slides mounted at 28" AFF. Color to be determined, 120V Plugs into existing 5-20 receptacle. Item 3: Cold Counter- (Qty 1) LTI/ Specline 60-CFMA Tempest air, 2 pan size, forced air cold counter, open base rear, stainless top and tray slides, molded fiberglass body, 10" solid ribbed tray slide, GAG protector guard with 1/2 glass over cold well only, LED lights, drain, 5" casters, 34" height with tray slides mounted at 28" AFF. Color to be determined, 120V Plugs into existing 5-20 receptacle. Item 4: Cashier stand- (Qty 1) LTI/Specline cashier stand, 36"X30" per drawing, stainless steel top and tray slide, fiberglass body with graphics, fixed under shelf, locking cash drawer with bell and removable tray, duplex outlet, hole with grommet, 5" casters, 33" height with 10" solid ribbed tray slide mounted at 28" AFF. stainless steel interior liner. color to be determined, plugs into owner supplied receptacle. 120V plugs into existing 5- 20 receptacle. Item 5: Milk Box Existing or owner supplied milk box. Verify length. Plugs into existing 5-20 receptacle Item 6: Beverage/Solid top counter (Qty 1) LTI/ Specline 96-ST solid top/beverage counter, open base front, hinged doors. 5" backsplash, 48" trough with drain hose, stainless top, molded fiberglass body, 5" casters, 34" height. Color to be determined Item 7: Traystand Per drawing. 30" wide. No utensil cylinders. Item 8: Solid Top Counter (Qty 1) LTI/ Specline 50-ST Solid top counter for napkin and utensil dispensers, open base front with doors and locks, s.s. top, line up locks, 24" high petite molded fiberglass body with 5" casters, Item 9: Solid Top Counter (Qty 1) LTI/ Specline 50-ST Solid top counter for napkin and utensil dispensers, open base front with doors and locks, s.s. top, line up locks, 34" molded fiberglass body with 5" casters, Dent Middle School Provide new LTI/Specline food serving counters along with any ancillary items ( APPENDIX IV) to accompany the new serving line. Serving lines and ancillary items to be delivered and installed by the contractor. All counters to be black fiberglass bodies. Items shall also include the following features and options: Item 1: Hot/Cold Counter (Qty 2) Provide LTI/Specline 66" hot/cold food unit, (4) QS hot/cold wells. Counter to have 5" casters, fiberglass body, 36" standard height body with GAG protector with LED lights. 4" s.s. cutting board, 10" solid ribbed tray slide, line up locks, Daisy chain receptacles for items 2 and 3. Unit to use existing 5 wire 208v 3 phase 50 amp receptacle in location 1. Location 2 has 5 wire 208v 3 phase 30 amp receptacle. Item 2: Pizza Counter (Qty2) Provide LTI/Visions 50-ST-MOD solid top food counter with two tier Ceran top pizza shelves for whole pies. 46" wide in 50" counter with two tier glass guard with glass sides and front. Front glass to be closed for full service, top to bottom, rear to have open storage base. LED lights. Counter to be on 5" casters, 36" high molded fiberglass body and 10" solid ribbed tray slide mounted at 34". 4" s.s. folding cutting board, 208v 15.6 amps, 20 amp service. Daisy Chain plugs into receptacle in item 1. Item 3: Open Merchandiser(Qty 3) Federal RSSM378SC-MLK with roll up security door, 120v 16 amp 5-20 plug Item 4: Hot/Cold Counter(Qty 1) Provide LTI/Specline 84" hot/cold food unit, (5) QS hot/cold wells. Counter to have 5" casters, fiberglass body, 36" standard height body with GAG protector with LED lights. 4" s.s. cutting board, 10" solid ribbed tray slide, line up locks, Daisy chain receptacles for items 5 and 8. Unit to use existing 5 wire 208v 3 phase 50 amp receptacle. Item 5: Cold Food Counter(Qty 1) Provide LTI/Specline 36-CFMA Tempest air refrigerated 2 pan cold food counter with s.s top, include 5" casters, 36" fiberglass body". GAG protector guard with 1/2 glass and LED lights. 4" s.s. cutting board, 10" solid ribbed tray slide 120 V 7.5 amps, 15 amp service. 5-15P plug. Plugs into item 4 Item 6: Cold Food Counter(Qty 1) Provide LTI/Specline 60-CFMA Tempest air refrigerated 4 pan cold food counter with s.s top, include 5" casters, 36" fiberglass body". Dual section GAG guard with 1/2 glass on one side and full glass on the other. 4" s.s. cutting board, 10" solid ribbed tray slide 120 V 8.5 amps, 15 amp service. 5-15P plug. Plugs into item 7. Item 7: Hot/Cold Counter(Qty 1) Provide LTI/Specline 50" hot/cold food unit, (3) QS hot/cold wells. Counter to have 5" casters, fiberglass body, 36" standard height body with GAG protector with LED lights. 4" s.s. cutting board, 10" solid ribbed tray slide, line up locks, Daisy chain receptacle for items 3 and 6. Unit to use existing 5 wire 208v 3 phase 30 amp receptacle Item 8: Open Merchandiser(Qty 1) Federal RSSM3078SC 30" wide unit with Security cover 120v 16 amp 5-20 plug Item 9: Cashier stand(Qty 2) 28" LTI/Specline cashier stand counter, stainless steel top and tray slide, 36" high fiberglass body, stainless steel under-shelf, locking cash drawer with bell and removable tray, duplex outlet, 3" hole with grommet, 5" casters. 10" solid ribbed trayslides. Unit to have stainless steel interior liner. Unit to have cat 5 data receptacle. 120v 15 amp. Plugs into existing owner supplied receptacle.