Site work and new construction of a municipal facility in Ottawa, Ontario. Completed plans call for the construction of a 60,116-square-foot, one-story above grade municipal facility; 88,361-square-foot, one-story above grade municipal facility; 48,438-square-foot, one-story above grade municipal facility; 106,089-square-foot, two-story above grade municipal facility; and for site work for a municipal facility.

EllisDon Corporation, acting as the Construction Manager on behalf of Defense Construction Canada (DCC), is inviting Bidders to submit their Statement of Qualifications to pre-qualify to bid on the Eastern Ontario Campus Project. The project is located at 8370 Franktown Road, Richmond, ON. Construction of four buildings, three single-story and one two-story. Each building has a distinct floor plan and, the approximate square footage ranges from 5000 square meters to 10000 square meters. B12 will be the first building to be erected, followed by building B8, B11 and B13. Building 12 (B12) - Construction of a one-story building. The building footprint is 5585 square meters. Building 8 (B8) - Construction of a one-story building with a footprint of 8209 square meters. Construction of this building will start after building 12. Building 13 (B13) - Construction of a one-story building with a footprint of 4500 square meters. Construction of this building will start after building 11. Building 11 (B11) - Construction of a two-story building with a footprint of 9856 square meters. Construction of this building will start after building 8. EllisDon is looking for suppliers to prequalify for the following scopes of work: TP-44.1 - Concrete Formwork and Finishing TP-44.2 - Concrete Reinforcing TP-44.3 - Structural Steel Framing TP-44.4 - Roofing and Siding Panels (including dampproofing and skylights) TP-44.5 - Exterior Metal Doors and Hardware TP-44.7 - Overhead Doors and Operators dock levellers TP-44.8 - Metal Fabrication TP-44.9 - Windows Bonding capacity for the project is set at $10,000,000.00 Official bid documents must be obtained from www.merx.com Question Acceptance Deadline 2025/02/07 02:00:00 PM EST * The project value listed reflects the package estimate.