This is a service / maintenance or supply contract in Syracuse, New York. Contact the soliciting agency for additional information.

On Call Plumbing Sewer & Drain Services. The purpose of this IFB is to form pools of contractors that the Agency may draw from to contract for all phases of: 2.1.1 Lot #1, Plumbing-related Services (Interior/Exterior, within 30" of the exterior of the walls): Plumbing-related work including, but not limited to, repair/replacement of electric and fuel fired hot water tanks, repairing and/or replacing plumbing fixtures such as: toilets; sinks; bathtubs; drain systems; and water and sewer lines; and, 2.1.2 Lot #2, Plumbing-related Services (Drain work - Exterior) Such work exceeding 30" of the exterior of the walls, as detailed within pertinent City of Syracuse Code. 2.1.3 Lot #3, Sewer & Drain-related Work: Sewer & Drain-related work including, but not limited to: excavation of sewer lines, hydro-jet pumping, holding tank pumping, and sewage pump repair and installation. 2.1.4 Additional Services. Any other Plumbing and/or Sewer & Drain-related maintenance, repair, or installation work the Agency may order. 2.1.5 Work Standards. It is the responsibility of each Contractor to ensure that each worker provided by the Contractor shall be fully trained and qualified to provide any assigned work. Accordingly, all work provided shall be guaranteed by the Contractor to be performed in a workmanlike manner and in accordance with all applicable laws, codes, and/or regulations, including, but not limited to: Uniform Building Code (UBC) and the Uniform Plumbing Code (UPC). Right to Reject, Waive, or Terminate the IFB. Reject any or all bids, to waive any informality in the IFB process, or to terminate the IFB process at any time, if deemed by the Agency to be in its best interests. Right to Reject Any Bid. Reject and not consider any bid that does not meet the requirements of this IFB, including but not necessarily limited to incomplete bids and/or bids offering alternate or non-requested services. Question Deadline 02/21/2025 at 2:00 PM ET